Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length.

[dan]

looks great both on and off the water  , how many LEDs have you used

[portside II]

Hi Mike , tha tug has started to undergo a refit  as i had some problems with water ingress (my fault ,didn't seal the deck properly).
So i have ripped off the decks and replaced them with grp sheet and hopefully sealed them properly but now with more access to the motors and a full strength towing gear plate of plywood , the rear deck can be sealed in place with sicoflex type sealant or vasseline to allow access later .
In the last photo you can see the threaded bar and bracket bonded to the hull for bolting down the deck ,for this i used a D link with a bolt welded to the pin so it can be used as a grog eye.






daz

[MCAT]

PORTSIDE II   have you used some strange format on the pictures I cannot see any of them.

and am most intrested in this model

[Bryan Young]

Hi Mike , tha tug has started to undergo a refit  as i had some problems with water ingress (my fault ,didn't seal the deck properly).
So i have ripped off the decks and replaced them with grp sheet and hopefully sealed them properly but now with more access to the motors and a full strength towing gear plate of plywood , the rear deck can be sealed in place with sicoflex type sealant or vasseline to allow access later .
In the last photo you can see the threaded bar and bracket bonded to the hull for bolting down the deck ,for this i used a D link with a bolt welded to the pin so it can be used as a grog eye.






daz

Where did you get those useful looking clamps? BY.

[Brian Roberts]

Hi

I recently bought an assorted pack of 12 clamps from my local B&Q which included four similar sized ones to those shown.

They were black and cost less than £6, pretty good value I thought.

Cheers

Brian

[DickyD]

PORTSIDE II   have you used some strange format on the pictures I cannot see any of them.

and am most intrested in this model

Hi MCAT are you logged on, you cant see all the photos until you are logged on.

[John W E]

My dear friend Richard

Please think about your last posting, surely one must be logged in to the forum  before one can answer a reply

[portside II]

That is what was confusinig me John .
MCAT , i cant understand why you cant see the pics , my they do look good if i say so myself  .
Brian, i cant remember where i bought them from , but i have since i bought them well over 5 years ago so far managed to loose one and also loose all but one of the springs ,apart from that they are realy good and i would certanly recomend them to anyone who is looking for some ,and if they find any can they let me know cos i would like some more  .
daz

[craftysod]

Can see pics fine and regards clamps,keep checking pound shops