Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length.

[kiwi]

brilliant.
Anyone could make similar, using whatever materials are locally available, and whatever r/c and electrics they had at hand.
Very nice step-by-step instructions.
Well done Krishna
Thanks for posting
kiwi

[rathikrishna]

Good morning..and thank you all..the material to cover the foam board is nothing..means, nothing is used as a covering...but used some diluted NC (Nitro Cellulouse) Putty, with NC thinner, to seal all gaps by pouring it inside and shaking all the while, to spread all over..and exterior finishing..i sprayed two coats of ordinary, NC paint is cheaper as enamel paint..so, after first coat, leave a margin about 20 minutes..with a second thick coat all gaps and dents will be vanished..and here i used some pista green, with off white..and a little mix of mettalic silver with black for decks..we can also use any paint, that can be diluted with water..like acrylic emulsion..so, after drying, it will remain as waterproof..will add more crafts with foam board..now working on a PCF, in big scale..here with foam board we do not need any applications of putty, primer or anything..but can paint staright..will be very light..stiffer than balsa hull, and no fear of borers and termites..lives for a lifetime..and also add a build log, that explains the complicated nose section of a war ship hull..its all easy..so, can make ships..ships..ships..and on..and on...in one month 6 war ships...and RCying in a big scale..ta..ta..ta...bhoom...bhomm...

[Rob1962]

Hello, Very nice boat do you sell these by any chance please let me know thank you.


                           Robert

[dodgy geezer]

Looks like an Eezebilt to me!  http://modelboats.hobby-site.com/Neptune.html ...

Krishna, if you want to publish the plans for anyone to use, I would be happy to put them up on my site....   

[Krishna]

"Krishna, if you want to publish the plans for anyone to use, I would be happy to put them up on my site.... "  Sir, so sorry for the delay in reply.. if this one is useful, please take it.. and will also give you some more easy to build patterns, can make one within some hours, is 2 feet long hull.. now i completed some, and will share the plan once.. here i am adding two hulls is easy to make and need no any special tools.. one for a high speed speed sports boat, and one for a steam boat.. still working slowly..

[Krishna]

and when finished.. it will be nice ones..

[Stormbringer]

really cool mate 

[Krishna]

Yes Sir.. she is a rocket in water.. will add plan and drawing within a short time..

[dodgy geezer]

Ideally, to put these on a site for modellers, I like to have:

• Full-size plans as one or several A4 sized PDFs, so that people can print them out easily
• A set of instructions

Not essential, but nice to have to make things easy for people....

[Krishna]

sure Sir.. with pleasure.. i will add a full plan from top to bulk heads, all in real size, in A4 papers.. and also a clear step by step instructions.. give me a little time to add, as i am preparing for it.. and this craft behaves so cool and stunning in water even at very high speeds.. as the surface of foam board is too smooth itself, thers no use of any putty.. or primer.. give me a little time.. thanks for guidance..

[dodgy geezer]

No hurry - I just wanted to tell you what the ideal was! I'm sure we can work with anything you care to send, at any time...

[Krishna]

sure Sir.. thank you..