Model Boat Mayhem
The Shipyard ( Dry Dock ): Builds & Questions => Pleasure boats, Sports, Race, Power and Leisure Boats: => Topic started by: dannymax on June 16, 2006, 08:21:17 pm
-
Hoping to make a test sail next week but heres the progress so far on this kit. Theres still a lot to do and this is my first project and I have learnt a lot from some very basic mistakes.. I have been a little muddled by the kit if I was honest and will probably replace most of the resin fittings which are extremely poorly cast, in fact the white metal ones are not that fantastic either, still I have enjoyed this boat and can not wait to see her on the water, and then get on to finishing her off and correcting the mistakes... The cabin roof is confusing me at the moment as I am not sure that elastic bands will be enough to hold it to the curve of the windscreen whilst the araldite sets, its flexible enough to make the curve but it seems to me there will be a lot of pressure here. I have visions of it flying off in the middle of the lake.
(http://i11.photobucket.com/albums/a190/dannyandjackie/16.jpg)
(http://i11.photobucket.com/albums/a190/dannyandjackie/jun16th06600x450.jpg)
couple of questions re the actual boat though which I cant google.
1 what does TSMY stand for, and
2 where can I get scale Commodores pendant and white ensigns, as it states she can fly both of these as she is owned by the commodore of the RYS.
-
TSMY = Twin screw motor yacht.
Flags. Anything I've needed in this line, BECC have had in their range, I'm sure they can supply everything you need for this model. Westbourne keep a pretty good selection in stock.
-
Don't use araldite cos it will ping off into the middle of the lake use Stabilit Express it a 2 component glue,you get a tube and some white powder-no lads dont get excited not that type!!! mix both together and hey presto a good strong joint that does not let go
-
(http://i11.photobucket.com/albums/a190/dannyandjackie/melita17.jpg)
Just a quick new update today, not a lot to show in the picture but the electrics are all now fully operational for her maiden sail...
-
Some pics update today with the first days at the lake...
(http://i11.photobucket.com/albums/a190/dannyandjackie/seatrials2600x450.jpg)
(http://i11.photobucket.com/albums/a190/dannyandjackie/seatrials600x450.jpg)
Did it all go smoothly, well yes..everything ran smoothly, the stern was a little high and needs more weight so that will be corrected ..
One thing that was a casualty was one of the white metal anchors.. Any idea of a stockist to replace this type of anchor?
Danny
-
[qoote]
One thing that was a casualty was one of the white metal anchors.. Any idea of a stockist to replace this type of anchor?
If it was part of the kit have you tried asking Dean's?
HTH
Doug
-
Good idea, sent them an email and they said they send a replacement for free....... :)
add to the good customer service thread..
Danny
-
Just a little more work comleted including rear hatches, some rigging , more stanchions and guard rails etc
-
Is that a real workbench. ? It looks far too tidy. :o How do you find things. Nice boat.
-
I am kept under strict tidy control by my DW Jackie..