Model Boat Mayhem

The Shipyard ( Dry Dock ): Builds & Questions => Submarines R&D: => Topic started by: webbo on January 22, 2017, 09:54:40 pm

Title: setting up reciever
Post by: webbo on January 22, 2017, 09:54:40 pm
Hi all
Setting up a Corona RP6D1 receiver and am using 2x15 amp viper marine esc. 1st esc into channel 1 but does it matter which other channel I plug 2nd esc into :-)
Title: Re: setting up reciever
Post by: chas on January 22, 2017, 11:00:49 pm
No, it shouldn't matter, as long as the channel coresponds with the stick you want to use.
Title: Re: setting up reciever
Post by: salmon on January 23, 2017, 01:31:12 am
And you disconnect the red cable from the second esc. You do not want both providing power to the RX through the ESC.