Topic: Canadian Corvette K338 (Read 9834 times)

ggeorge · « **Reply #70 on:** February 28, 2012, 06:49:55 PM »

Here is my compleated 4in. GF Mk XIX in CP Mk XXIII mounting. Will still have to paint the correct colour on shield and weather the gun which will be applied in final painting. On to the next fitting.

tassie48 · « **Reply #71 on:** February 28, 2012, 09:54:39 PM »

thats a piece of art well done tassie48

ggeorge · « **Reply #72 on:** March 06, 2012, 01:47:29 AM »

Started the Hedgehog and here is the results so far.

ggeorge · « **Reply #73 on:** March 09, 2012, 02:21:28 AM »

Here are a couple of photos as i progress on the hedgehog.

Norseman · « **Reply #74 on:** March 09, 2012, 03:04:02 AM »

Great detailing Ggeorge

might be something of interest to you on this site
http://www.hnsa.org/doc/index.htm
I was looking at depth charge plans there.

Dave

pugwash · « **Reply #75 on:** March 09, 2012, 03:55:30 AM »

Great work on the hedgehog - this is going to be some build

Geoff

ggeorge · « **Reply #76 on:** March 11, 2012, 09:28:28 PM »

One Hedgehog projectile compleated 23 more to assemble.

ggeorge · « **Reply #77 on:** March 13, 2012, 01:45:11 AM »

23 more compleated

pugwash · « **Reply #78 on:** March 13, 2012, 09:26:10 AM »

Gerry,You don't waste any time do you - lovely precise work.

Geoff

ggeorge · « **Reply #79 on:** March 21, 2012, 11:29:29 AM »

I just got back on. It must have been a very frustrating week for Martin and much appreciated from all of us. Here are a couple of pix of the finishes hedgehog.

rem2007 · « **Reply #80 on:** March 22, 2012, 01:01:18 AM »

...doesn't look the hedgehog I found in my front garden last year.

ggeorge · « **Reply #81 on:** March 23, 2012, 02:14:40 AM »

Here I just put this one togeather. How is this for a scale hedgehog.

ggeorge · « **Reply #82 on:** March 23, 2012, 02:22:00 AM »

I have started to build the 2pdr Qf Mk VIII pom-pom in single Mk VII mounting. Here are a couple of pix.

rem2007 · « **Reply #83 on:** March 23, 2012, 02:32:25 AM »

pmsl

ggeorge · « **Reply #84 on:** April 07, 2012, 11:28:49 PM »

Hi all,
I got part way through building the 2 pdr gun and it just did not look right even with the drawings that state a scale I am using. So after taking measurments I find the gun was too small.
So into my scrap pile. Here are a couple of photos of the new build so far.

oldiron · « **Reply #85 on:** April 08, 2012, 12:11:33 AM »

Looks much better.

John

pugwash · « **Reply #86 on:** April 08, 2012, 01:55:48 AM »

Yet again it does seem a shame to cover all that beautiful brass work with paint.

Geoff

spooksgone · « **Reply #87 on:** April 08, 2012, 05:12:09 PM »

Wow!!! Looking forward to seeing the rest of the build.

Norseman · « **Reply #88 on:** April 08, 2012, 06:48:36 PM »

Just popping in to say hello and rejoin the thread after the meltdown.
Keep up the good work ....... Ooh, the Hedgehog was a masterpeice

Dave

kraftykid · « **Reply #89 on:** April 10, 2012, 03:11:05 PM »

Quote from: ggeorge on February 18, 2012, 03:02:16 AM

Hi Martin,
The reason he did not seem impressed is that he wants to clime on the boat and I keep putting him down.

how any lives does he have now then lol

ggeorge · « **Reply #90 on:** April 16, 2012, 02:55:49 AM »

Hi again,
I have been busy for a few days but I did get a bit of time on the build. I just have to finish off some more detail and build the ammo box. What I did do was order some photo etched gun sights. Here are the latest photos.

ggeorge · « **Reply #91 on:** April 18, 2012, 04:18:56 AM »

Here are a few more photos of the nearly compleated gun. I still have to the sights and paint.

Voyager · « **Reply #92 on:** June 20, 2012, 06:55:04 PM »

Beautiful workmanship

Norseman · « **Reply #93 on:** June 20, 2012, 08:01:36 PM »

Just colour me green George, a deep deep green.

Dave

News:

Author Topic: Canadian Corvette K338 (Read 9834 times)

ggeorge

tassie48

ggeorge

ggeorge

pugwash

ggeorge

ggeorge

pugwash