Model Boat Mayhem

Please login or register.

Login with username, password and session length.
Pages: [1]   Go Down

Author Topic: Binding planet 5 to receivers  (Read 2680 times)

panelman

  • Shipmate
  • *
  • Offline Offline
  • Posts: 4
  • Location: Blackpool Lancashire.
Binding planet 5 to receivers
« on: October 22, 2014, 01:02:16 am »

Having a problem binding receivers, one receiver the light flashes constantly and does nothing when the bind button pressed, the other receiver does nothing at all, do I ditch them and buy new receivers or something else {:-{
Logged
Modelling is now my life

john44

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 1,659
  • member of the Potteries Model boat club
Re: Binding planet 5 to receivers
« Reply #1 on: October 22, 2014, 08:46:51 am »

Hi panel an, I don't know what method you are using to bind your set.
With the Planet you first power up your Rx, which will flash quickly,
Then you turn on the Tx the Rx flashing should then slow down and
Stay solid when the binding has finished.
If that does not work borrow a Rx you know works and try binding it
To your Tx. If that binds and yours don,t you will need to replace your Rx units.
If you can't bind the borrowed Rx with your Tx your trouble lies with the Tx not
Your Recievers. Hope this helps.


John
Logged

panelman

  • Shipmate
  • *
  • Offline Offline
  • Posts: 4
  • Location: Blackpool Lancashire.
Re: Binding planet 5 to receivers
« Reply #2 on: October 22, 2014, 10:42:39 am »

Thanks for that John I will give it a go.
Logged
Modelling is now my life

john44

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 1,659
  • member of the Potteries Model boat club
Re: Binding planet 5 to receivers
« Reply #3 on: October 22, 2014, 03:44:36 pm »

Hi panelman, I forgot to say, when you power up the Rx press the binding button  :embarrassed:
You probably know to do that anyway.


John
Logged
Pages: [1]   Go Up
 

Page created in 0.097 seconds with 21 queries.