Model Boat Mayhem

Please login or register.

Login with username, password and session length.
Pages: [1]   Go Down

Author Topic: suitable replacement outrunner for Airboat  (Read 1465 times)

jaymac

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 2,140
  • Location: Somerset
suitable replacement outrunner for Airboat
« on: October 19, 2017, 01:08:43 pm »

problem again with my airboat this time methinks the motor is Kaput no movement and a wee bit of smoke.Looking for a suitable replacement for a Hyperion HP-Z3007-20.this was running on a 9x6 prop and specs are below am looking for similar albeit cheaper any suggestions please


Operating voltage: 2s – 3s LiPo
[/size]Max. eff. Current: 25 – 28 A[/color]
[/size]Peak current: 32 (30 s)[/color]
[/size]KV (rpm/V): 1580[/color]
[/size]Used Regulator: Phoenix 45, Software 1.54 (Timing: standard)[/color]
[/size]Stator Diam. (mm): 30[/color]
[/size]Stator Length (mm): 07[/color]
[/size]Outside Diameter (mm): 37[/color]
[/size]Length (mm): 31.8[/color]
[/size]Output Shaft Diameter (mm): 4[/color]
[/size]Mount Screw Diameter (mm): 3[/color]
Logged

ChrisF

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 1,316
  • What's my favourite cake!
  • Location: Warwick
Re: suitable replacement outrunner for Airboat
« Reply #1 on: October 20, 2017, 10:46:23 pm »

Turnigy and Leopard are makes that have been recommended to me with the latter being available from the Component Shop for one.

I've decided to give an Overlander a try (Overlander Batteries) and as they are primarily designed for aircraft would suit your use.

Have a look at both web-sites for what matches your requirements.
Logged
Building Fairey Marine boats: River Cruiser 23 prototype, Huntress 23 Long Cabin with stern-drive, Huntsman 28, Huntsman 31 and Swordsman 33 and two more to come! All scratch built and to a scale of 1:12
Pages: [1]   Go Up
 

Page created in 0.106 seconds with 21 queries.