Model Boat Mayhem

Please login or register.

Login with username, password and session length.
Pages: [1]   Go Down

Author Topic: electronize motors  (Read 3581 times)

modelman66

  • Guest
electronize motors
« on: April 09, 2008, 08:14:14 pm »

has anyone used the electronize 360-14 type motors for a1/200 scale battleship they are low drain and only rev to 5200 rpm no load would they be fast enough [scale speed] direct drive with 2x40mm 3 blade props.
Logged

modelman66

  • Guest
Re: electronize motors
« Reply #1 on: July 10, 2008, 08:37:05 pm »

THE ANSWER IS NO AS TESTED BY ME
Logged

Shipmate60

  • Global Moderator
  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 5,862
  • You bark - I will bite!!!
  • Location: Fareham
Re: electronize motors
« Reply #2 on: July 10, 2008, 10:15:34 pm »

Are they for your Tirpitz?

Bob
Logged
Officially a GOG.

modelman66

  • Guest
Re: electronize motors
« Reply #3 on: July 11, 2008, 07:38:21 pm »

no i tried them on my bismarck serious lack of power ,changed them for two graupner 400 direct drive little too fast but its nice to have a little in reserve.i have fitted one motor 600eco with x type 45mm prop to tirpitz very fast but cruises nicely .the tirpitz model is very easy at unfouling its own prop due to the extra power in ashby ville i have to contend with strong wind,waves,jet ski and weeds so it is a better model to operate in those conditions. but i suspect the electronize motors would work well if conditions were favourable unfortunatly where i go it rarely is. if you have seen my vids you will know what i mean  hope that answers your question take care pete.
Logged
Pages: [1]   Go Up
 

Page created in 0.367 seconds with 21 queries.