Topic: 4mm Stainless Steel prop shaft inner required. (Read 3136 times)

Bob_V · « **on:** April 25, 2009, 11:17:50 pm »

I need to replace the 4mm inner prop shafts on one of my boats.

I have been playing about with different couplings and motor mounts as you do!

The current shafts are brass and are now slightly too short and I would prefer to replace them with stainless steel.

Need two about 200mm long that I can cut to size. I have an M4 die to cut the threads so blanks would do.

Any ideas where I can get them from?

Bob

exvtop · « **Reply #1 on:** April 25, 2009, 11:25:53 pm »

Try Mallard Metal Packs Ltd - www.mallardmetals.co.uk
4mm stainless is £1.34 per foot.
Mike

Bob_V · « **Reply #2 on:** April 28, 2009, 08:59:02 pm »

Mike

I have now been able to obtain some from another source. Thanks for the link to Mallard Metals.

Looks very useful and have made a note for future reference. Interesting that they sell 4mm rod by the foot!

Bob.

News:

Author Topic: 4mm Stainless Steel prop shaft inner required. (Read 3136 times)

Bob_V

4mm Stainless Steel prop shaft inner required.

exvtop

Re: 4mm Stainless Steel prop shaft inner required.

Bob_V

Re: 4mm Stainless Steel prop shaft inner required.