Topic: The Ormesby Cross (Read 13384 times)

chipchase · « **on:** December 29, 2006, 01:22:35 pm »

Hi all
Just thought I would post a few photos of my latest build the Ormesby Cross.
She is owned by Svitzer Marine Ltd and working on the Tees at Middlesborough.
I have completed most of the hull work and just started the super structure I will keep you posted as I progress. I have had in the water to check for ballast, it looks as if she is going to weigh around 44lb total weight ( heavy ::) ::) ::) ).

titan · « **Reply #1 on:** December 30, 2006, 11:11:21 am »

::)Coming on well Brian ,Thought you had moved in to the land of budgies haven't heard or seen you for a while all the best and good look to you and your good lady p.s happy building Tommy.

ministeve · « **Reply #2 on:** December 30, 2006, 04:39:07 pm »

very nice is that one of the tyne tug hulls if so how long is she. i am about to start another portgarth and looking forward to doing the hull fitting out using mmm steerable Kort's and 70mm thruster props from prop shop. what are using for your motors Ive got some monsters off a new shape Astra a bit thirsty on battery power but with so much buoyancy in the hull i can just put more batterys in her prob 2x 12amp and 1x2v 4amp for the winch.

chipchase · « **Reply #3 on:** December 30, 2006, 05:12:15 pm »

Hi ministeve
No this is not one of tyne models hulls, I obtained this hull from MMM.
The steerable Kort’s are from tyne models, Grapner bow thruster and two car fan blower motors for main drive.

Ps yes Tommy I am still building models, waiting for the new release from Tyne Models I understand it will be out in April.

Eddy Matthews · « **Reply #4 on:** December 30, 2006, 06:43:52 pm »

I hope you don't think I'm being a sm*rt*ss chipchase (I realise it may just be a typo!), but just so you name the boat correctly when it's built, it's the "Ormesby Cross" (Notice the E in Ormesby) - These tugs were used on the Tees, and they all took their names from local villages around Middlesbrough.... Hence Norton Cross, Ayton Cross etc etc.

Regards
Eddy

chipchase · « **Reply #5 on:** December 31, 2006, 12:23:02 pm »

::) ::)

Yes eddy it was a typing error cheers anyway.

chipchase

chipchase · « **Reply #6 on:** January 27, 2007, 11:14:49 am »

Hi
Two more photos of the Ormesby Cross build, more to come later,

.

Brian.

ministeve · « **Reply #7 on:** January 27, 2007, 11:45:41 am »

looks great brian a mate of mine has just purchaced 2 of these hulls. they are going to look great ploughing down a lake keep photos coming pls
steve

andywright · « **Reply #8 on:** January 28, 2007, 12:55:10 am »

Brian
Where did you get those winches from, they look great
Andy

chipchase · « **Reply #9 on:** January 29, 2007, 09:49:29 am »

Hi Andy
I made them from bits and pieces accumulated over the years, I did try to purchase the winches but unfortunately there are no suppliers that produce a winch that looks any thing like the winch/windless on the Ormesby. They are not yet complete, still got electrical control box, anchor chains and hydraulic pipes to fit. I am starting to build the main aft towing winch today, will post photos as soon as complete.

Brian.

chipchase · « **Reply #10 on:** January 29, 2007, 09:58:58 am »

Hi Andy
Photo of the aft winch on the Ormesby.

brian

andywright · « **Reply #11 on:** January 29, 2007, 10:40:24 pm »

I am taking my ship to Swansea tomorrow for a few days., Ayton Cross is there so will take a look at her.
Andy

chipchase · « **Reply #12 on:** February 03, 2007, 05:11:01 pm »

Hi all
Just started the super structure thought I would let you see the progress, now you see why it gets the nickname the lighthouse because of the size of the wheelhouse.

brian

chipchase · « **Reply #13 on:** February 16, 2007, 10:30:05 am »

Hi all
This Is the latest photo of the Ormesby, the wheelhouse was quite a challange.

Voyager · « **Reply #14 on:** February 16, 2007, 10:34:35 am »

Your doing a grand job, i wish i could build stuff looking that good >:(

chipchase · « **Reply #15 on:** March 02, 2007, 06:40:46 pm »

Hi all
Two more photos of the Ormesby Cross build, and one with the Flying Spindrift. I think they will look OK on the lake together

. More to come later must get started on the towing winch.

Brian

chipchase · « **Reply #16 on:** April 22, 2007, 07:29:04 pm »

Hi all
Stern winch is finally finished - took these photos today; she sails well after a few sea trials. I first tried her with two car fan blower motors, which couldn’t pull the skin of a rice pudding :( :( :(. I went out and purchased two Torpedo 850 motors - what a difference!

Brian

Martin (Admin) · « **Reply #17 on:** April 22, 2007, 08:26:19 pm »

Car heater motors were no good?

Any chance you could post pictures of the old and replacement motors for comparison?

Martin

mike_victoriabc · « **Reply #18 on:** April 23, 2007, 01:40:46 am »

Nice looking boats - any chance of photos of the winch and how you built it?

chipchase · « **Reply #19 on:** April 23, 2007, 11:57:29 am »

Quote from: Mayhem - Forum Admin on April 22, 2007, 08:26:19 pm

Car heater motors were no good?

Any chance you could post pictures of the old and replacement motors for comparison?

Martin

Hi Martin
Photos of both motors, the car fan blower motors had never been used. I bought them from Doncaster last year. I have used this type of motor in the past with good success. After fitting them in the Ormesby and testing the performance of the motors, I found that they where underpowered to say the least. After removing the motors they were bench checked and found they were running at 2250rpm. This was checked with friends’ motors of the same type and found they ran at 5500rpm. This was why I upgraded the motors to two torpedo 850s. I was a little bit apprehensive as this type of motor runs at 9500rpm, but she runs great. I have just weighed her with ballast and batteries. The total weight is 52lbs.

Brian

HS93 (RIP) · « **Reply #20 on:** April 23, 2007, 12:15:46 pm »

Where your fan motors marked 12v or just sold as?

Peter

chipchase · « **Reply #21 on:** April 23, 2007, 07:25:38 pm »

Quote from: HS93 on April 23, 2007, 12:15:46 pm

Where your fan motors marked 12v or just sold as?

Peter

Hi Peter
They were sold as 12v, this is the name plate on the motors.
Brian

chipchase · « **Reply #22 on:** April 23, 2007, 07:51:49 pm »

Hi Mike
Some closer shots of the stern winch. I built the winch out of copper pipe plasicard
and white metal fittings that where given to me by two very good friends. (Tom and Les from Tyne Models).

Brian

HS93 (RIP) · « **Reply #23 on:** April 23, 2007, 08:47:48 pm »

The reason I asked was I wondered if they had been 24v volt motors, I have seen a lot of them about and yes they will work of 12v but not very well, I wondered whether they Had been from commercial vehicles. They must be just low power version.

Peter

Martin (Admin) · « **Reply #24 on:** April 23, 2007, 09:47:33 pm »

That's strange about the fan heater motors, never heard of that before.
A lesson for us all there me thinks - check the outout speed!

News:

Author Topic: The Ormesby Cross (Read 13384 times)

titan

Eddy Matthews