Yes, left flaps switch
- Pull back, winch in
push forward winch out.
Left Gear switch
- Back, Winch power off
Forward, Winch power on.
Here a slightly nutty diagram to run the thing, (and maybe a fire monitor pump)
I worked this up for someones Tito Neri, running on a Dx6, to run their bow thruster and fire monitors.
The four joystick channels ran the throttles and steering on each schotttel drive.
Just substitute
Winch for
Bow
Thruster
Push the gear switch forward, and power is supplied to the bow thruster(winch).
Flip the flap switch to change the thruster direction. Pull back on both switches to turn all off.
To operate, the pump, the flaps switch was pushed forward while the gear switch was back.
Pull back on both switches to turn all off.