Topic: Another launch build (Read 7500 times)

Bernhard · « **on:** January 09, 2011, 12:47:56 pm »

hi...I have Another Friend here in Denmark .Poul....he have starting on this Launch,,hull from UK...where he will have a Cheddar proteus in

gondolier88 · « **Reply #1 on:** January 09, 2011, 01:01:56 pm »

I think he needs a much larger funnel- the current one looks very underscale, other than that It's a lovely little launch, the steam plant looks very tidy.

Greg

Bernhard · « **Reply #2 on:** January 09, 2011, 01:04:49 pm »

hmm thanks yes can be? bot it is the one from the proteus,, i think allso it will be looking better with a bigger one............

gondolier88 · « **Reply #3 on:** January 09, 2011, 01:08:03 pm »

Easiest way would be to just sleeve the one that is already on with some aluminium or heat resistant plastic tubing- this will keep all the critical tube sizes correct, but will appear bigger to the eye an in scale with the rest of the boat.

Greg

Bernhard · « **Reply #4 on:** January 09, 2011, 01:09:57 pm »

ohh yes good ide,,,Thanks

kno3 · « **Reply #5 on:** January 09, 2011, 01:21:47 pm »

Another beauty in the making...

Bob_V · « **Reply #6 on:** January 09, 2011, 03:20:26 pm »

Bernhard,

What hull is your friend using?

From the photo it looks as though he has trimmed a little off the top of the hull to reduce the height. Is that correct?

Excellent woodwork. Wish I was good enough to turn out work like that. Can't wait to see it finished.

Bob.

gamma · « **Reply #7 on:** January 09, 2011, 04:04:29 pm »

Bernhard, you have great buddies; this boat is going to be another great model...i love the details like the brass portholes in the front frame

Netleyned · « **Reply #8 on:** January 09, 2011, 04:22:04 pm »

Have a look at this Bob
http://www.orionmouldings.com/fishingmodelboathulls.htm

Ned

Bernhard · « **Reply #9 on:** January 09, 2011, 04:54:48 pm »

.....yes it is this hull Traditional Scottish Fifie 1:12 Scale
.yes he have cut some of the hull....it look alot better ,,and it didn't neat so much ballast in,,,to stay right in the water,,,it will be around 20kg,,,total..........

Bob_V · « **Reply #10 on:** January 09, 2011, 05:55:08 pm »

Thanks for the info on the hull. At 50" that is a lot of boat.

Pity I don't have the room to build one that size.

Currently waiting for my River Queen.

Bob.

Bernhard · « **Reply #11 on:** January 09, 2011, 06:04:31 pm »

hi Bob,,,,,,,The River Queen is a great boat,,,and a nice size to ..not to heavy ,,,i have 2 off them.....I'm very happy fore

Regards Bernhard

Bernhard · « **Reply #12 on:** January 16, 2011, 05:14:23 pm »

hi.......Poul have don some more work on the launch,,,sorry the photo whas to small,,,i will try to get bigger ones,,i dont know how to delay this post,,,,,,,,

KBIO · « **Reply #13 on:** January 16, 2011, 09:01:08 pm »

Good evening !
Hello Bernard , you are gone for another splendid project. I am planing to built one like yours and now , I have seen that you cut the hull to make it lower (she look nicer) , I am really excited.

Is it what you cut which is shown on the photo? If so, how many ckinks did you cut out (2?) ? It seems that you cut the top (surrounding belt ?) , then an extra piece of hull. Can you explain why?
Also; is there any passage (hole ?) already made to run the shaft for the propeller through the queel ?
Last question: did you ordered it with wood finish paint or did you do it yourself???
Thank you for showing and sparing your talent!

Regards.

Bernhard · « **Reply #14 on:** January 16, 2011, 10:02:15 pm »

Hi......Thanks ..bot . it is my friend Poul there is the builder on this,,,,,, yes it was with wood finish...and it look a lot better now...first he did it...so he didn't neat to much ballast in it,,,he did cut what you see in the photo,,,and came the surrounding belt back ...it is a littel more heavy?,,,and is different than the clinker.no you have to make the Hull your selves,,no problem... i will try to post photos bot they are JPG,,,

Regards Bernhard,,,,,,,,,,

Bernhard · « **Reply #15 on:** January 16, 2011, 10:41:02 pm »

2 more

KBIO · « **Reply #16 on:** January 17, 2011, 08:22:50 pm »

Good evening!
EXCELLENT!

And what a workshop!!

Regards!

Bernhard · « **Reply #17 on:** February 03, 2011, 06:57:20 pm »

Hi........So have Poul don a littel more wood work..and some brass tools and a shootgun,,,

Bernhard · « **Reply #18 on:** March 01, 2011, 05:37:20 pm »

Hi..so is the Boat in the water,

Flyerjeff · « **Reply #19 on:** March 13, 2011, 01:00:55 am »

Bernhard, such great detail, Looks GREAT!!!!!

News:

Author Topic: Another launch build (Read 7500 times)

Bernhard

Bernhard

Bernhard

kno3

gamma

Bernhard

Bernhard

Bernhard

KBIO

Bernhard

Bernhard

KBIO

Bernhard

Bernhard

Flyerjeff