Model Boat Mayhem

Please login or register.

Login with username, password and session length.
Pages: [1]   Go Down

Author Topic: Caldercraft Peggy motor size  (Read 2254 times)

bobgrimward

  • Guest
Caldercraft Peggy motor size
« on: January 29, 2011, 04:20:27 pm »
Hi Guys,
I wonder if you could help. I have just brought a second hand unstarted Caldercraft Peggy complete with R/C and motor. The problem I have is the motor looks rather big to me although I am only a begineer. It is a Buhler and the markings on the case are 0960V6V it casing measures 80mm and is about 50mm wide. Would this be OK to use or do I need to down size it and could you tell me what size prop I would need for this motor if I can use it?
Many thanks
Logged

nhp651

  • Guest
Re: Caldercraft Peggy motor size
« Reply #1 on: January 29, 2011, 04:34:59 pm »
YES, that would do fine......beautiful slow torquey motors that will spin a big prop withought breaking sweat, and will run off 6, 12 or even 18 volts......i have a few of them, and they are lovely.
Logged

bobgrimward

  • Guest
Re: Caldercraft Peggy motor size
« Reply #2 on: January 30, 2011, 03:53:53 pm »
Many thanks for your advice, what prop size would I need.
Logged

brianc

  • Guest
Re: Caldercraft Peggy motor size
« Reply #3 on: January 30, 2011, 04:57:47 pm »
I`ve got a Peggy kit and it was supplied with an 80mm four bladed  :-))
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.017 seconds with 20 queries.