Technical, Techniques, Hints, and Tips > Radio Equipment

fleet tx

(1/2) > >>

gary r uk:
hi guys
i finally located a fleet TX but with out xtails can i use futaba xtails??
gary

dazzle:
Hi Gary, If its early 27mhz am tx,  futaba, accoms, hitec, xtals should work ok.
If its later 27 or 40 mhz fm, I'm  not sure.
dazzle    bob

malcolmfrary:
If you have crystals, have a quick try at home.  If it works, it works.  If not turn off quick, knowledge gained and no harm done.  Generally speaking, the transmitter crystal causes the TX to transmit on the frequency stamped on the can - due to the way receivers work, the RX crystal is offset, and some manufacturers have their own ideas.

dazzle:
Gary nearly forgot Oop's,
Always use xtals in the matched pairs they came in, marked tx  rx,
 ie 2 futaba or 2 hitec etc.
dazzle (bob)

Mankster:

--- Quote from: dazzle on May 18, 2007, 12:48:22 pm ---Gary nearly forgot Oop's,
Always use xtals in the matched pairs they came in, marked tx  rx,
 ie 2 futaba or 2 hitec etc.
dazzle (bob)

--- End quote ---

I though you were ment to use the crystals that matched what you were pluging them into ??? Futaba Tx- Futaba Crystal,  Hitec RX -  Hitec Crystal ?

Navigation

[0] Message Index

[#] Next page