Technical, Techniques, Hints, and Tips > Radio Equipment

Mini Servo's

<< < (2/3) > >>

Jankers:
Thanks for your replies guys.

I used the ebay as an example as the servos listed in the uk
seem to be similar to the one aston specified, ie 0.6kg or thereabouts.

The Hong Kong example lists 1.3kg, about half that of a standard servo.

I have found some examples on the Howes sie that may fit, but, having never used anything other than Futaba
or Acombs standards I just wondered if anyone had experience of the mini variety,

Time for a little more research.

J.

Daryl:
I ahve used mini and micro servos, one in the Revell S-Boat moving three scale rudders with no problems, on in a 1/350 Yamato and the other in a Astec Falcon FE all with no problems.

Daryl

aston:
I have used the Hitec servos I mentioned earlier in a couple of models, the latest being in  my modification of the RNLI Severn class which they are selling as ready to run. Mine now has proper radio and motors and is geat fun.  I also have one in a billings Waveney class ( the small one, about 14") and in my Heller KGV.  All run perfectly.

Aston

Shipmate60:
I use mini servos in my small plastic models that are remote controlled, no problems either, but have you considered mounting a full size servo on its side or inverted?

Bob

Jankers:
Shipmate,

Yes, did consider it but no room.

I think I've cracked it, can get a servo ar a local shop
which aught to fit, allbeit a squeeze so shall give it a try.


J.

Navigation

[0] Message Index

[#] Next page

[*] Previous page