Topic: Revell Thermopylae (Read 29489 times)

ballastanksian · « **Reply #25 on:** February 09, 2016, 08:26:08 pm »

I like the bowsprit and her array of chains. Looking darn good Ken.

kpnuts · « **Reply #26 on:** February 16, 2016, 08:38:38 pm »

Well I'm so cross with myself, went to do some rigging on this and dropped it, snapped off the rear mast broke the shrouds on the fore mast snapped some of the rigging on the bowsprit, a few of the hatches have come off, broken some of the stanchions round the top of the rear cabin. luckily nothing that cant be fixed but its put me back quite a bit, Grrrr and no one to blame but my butter fingers. I could almost swear, flippin heck, blimey and fiddle sticks (sorry for the profanities there)

ballastanksian · « **Reply #27 on:** February 16, 2016, 08:45:16 pm »

It is so bloomin annoying when our muscle control systems fail us in such a dramatic way. It almost calls for a senior moment page!

Well, I hope none of the bits have dissapeared and that yoyu have no problems getting everything restored.

kpnuts · « **Reply #28 on:** February 16, 2016, 08:50:12 pm »

Luckily I have all the bits that matter, a couple of the belaying pins have snapped off and disappeared but I don't think it will matter and I don't think anyone would notice unless I pointed it out.

kpnuts · « **Reply #29 on:** February 24, 2016, 07:49:46 pm »

Hi all well repairs made.
This believe it or not was the worst bit ( I glued that wheel on at least half a dozen times)

and made a bit more progress

ballastanksian · « **Reply #30 on:** February 24, 2016, 09:52:30 pm »

She's a sweetie and will look amazing with her sails.

I am pleased you are back on track after the annoying damage

kpnuts · « **Reply #31 on:** February 28, 2016, 08:25:25 pm »

Hi all here is tonight update may I first say anyone contemplating this ship, please read the rigging instructions alongside the build instructions and dont leave them till the end, as you can plainly see I have not done that and still I've made things extremely awkward for myself, there is some rigging from the main mast to the four iron rings in the deck which now I have the belaying pin racks and the foremast shrouds in place will be extremely difficult to attatch.
anyway here is where I'm at now.

ballastanksian · « **Reply #32 on:** February 28, 2016, 08:47:07 pm »

Neat rigging Ken.

kpnuts · « **Reply #33 on:** March 14, 2016, 06:14:27 pm »

Hi all here is the next update on this

Baring in mind these are almost Identical scales (the thermop is 1/96 and the soliel is 1/100) I still cant believe how much heavier and bulkier and cumbersom the soliel was (I mean I know she had to be able to withstand cannon fire and such) but she must have been sooooooo slooooowwwww

kpnuts · « **Reply #34 on:** April 04, 2016, 08:11:58 pm »

Hi all well this must be jinxed I went to get an hour in tonight and have had a catastrophe, now I've got several hours of remedial work, it's now back in the outhouse while I calm down.

ballastanksian · « **Reply #35 on:** April 04, 2016, 09:06:24 pm »

Oh No

, how did you spring your Bowsprit? Will it glue straight back in place without removing the sheets and chains? I am sorry to see that Sods law has been at work and wish you a successful repair job.

You are right regarding the shapes of the ships, they are designed for different jobs in the same way warships and container ships are differently shaped and sized today

kpnuts · « **Reply #36 on:** April 04, 2016, 10:15:14 pm »

Thanks mate unfortunately for some reason I can't get it back in place either the dolphin striker is bent or the top of the foremost is bent so will have to cut all the rigging and start again (just deciding which to cut)

derekwarner · « **Reply #37 on:** April 04, 2016, 11:06:02 pm »

Ouch Ken

....however just like the real vessel, with all of the ropes & wires in tension [triangle of forces]....it would have been impossible to simply reattach the bowsprit

Has the foremast top gallant moved/sprung backwards after the tension was lost?

Keep us posted............ Derek

kpnuts · « **Reply #38 on:** April 05, 2016, 06:57:46 am »

Thanks mate unfortunately for some reason I can't get it back in place either the dolphin striker is bent or the top of the foremost is bent so will have to cut all the rigging and start again (just deciding which to cut)

kpnuts · « **Reply #39 on:** April 15, 2016, 09:14:03 pm »

Well repairs made and a small update, I really hope I don't have any further catastrophe's

kpnuts · « **Reply #40 on:** May 18, 2016, 08:07:51 pm »

Hi all, well I needed to do something to take my mind off things so decided to start the ratlines (actually I found it very relaxing)

kpnuts · « **Reply #41 on:** May 20, 2016, 09:00:09 pm »

Hi all more progress on the Thermopylae

ballastanksian · « **Reply #42 on:** May 20, 2016, 09:54:44 pm »

I am very peased to see that you managed to repair her without resort to throwing it in the bin or just going mad and running up and down your road waving the model in the air and ranting.

She's really starting to look excellent and I am glad that you found theraputic value from doing the ratlines.

kpnuts · « **Reply #43 on:** July 31, 2016, 05:56:45 pm »

Hi all got the rear railings on and made a start on the aft mast ratlines connections.

ballastanksian · « **Reply #44 on:** August 01, 2016, 08:21:01 pm »

Well if you can do this sort of work before you get your eyesight up to scratch, then imagine how good it will be afterwards!

Looking good Ken.

kpnuts · « **Reply #45 on:** June 22, 2017, 06:46:37 pm »

Hi all here is the progress so far.

kpnuts · « **Reply #46 on:** June 24, 2017, 04:21:16 pm »

Hi all here is the next update .

ballastanksian · « **Reply #47 on:** June 24, 2017, 10:59:55 pm »

Gorgeous Ken

Attractive rigging.

kpnuts · « **Reply #48 on:** June 27, 2017, 08:39:35 pm »

Hi all here is the next update I noticed a split in the vac form mizzen sail and was going to patch it with a stitched square then thought I would experiment with some super glue.

Unfortunately the superglue made the weathering go white but a coat of acrylic white and you would never know.

I've finished all the ratlines on the forecast

kpnuts · « **Reply #49 on:** June 30, 2017, 08:39:54 pm »

Hi all here is the next update seems like a lot of rigging on this but it's nothing compared to the soliel royal, and I've barely started this.

News:

Author Topic: Revell Thermopylae (Read 29489 times)