Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length.

[tassie48]

Hi Crew I am after a supplier of small nuts and bolts 2,3,4,5,6.mm to use as scale fittings on my current build any and all help much appreciated tassie48

[Backerther]

Hi
Why don't you make MISUMI available to get such parts as you are looking for?
The company carries much smaller ones like to use for eye glasses.
 https://jp.c.misumi-ec.com/book/MSM1_K06/pdf/1263.pdf

[derekwarner]

tassie48................ these people are great............cost competetive .....highly recommended....[realistic air parcel post from Germany World Wide]  ....


Half and scale hex heads in steel and brass


Derek




https://knupfer.info/

[Umi_Ryuzuki]

For tiny scale hardware you might look through Walthers products, online, or at the local model railroad shop.
 
https://www.walthers.com/walthers_tools_screws?productListFilters=
 .

[grendel]

I managed to pick up a small tub of M2 nuts and bolts at a boot fair, the 60mm dia tub 20mm tall probably has several lifetimes supply of assorted 2mm nuts and bolts in sizes from about 6mm long to 20mm long, a tub of 1000 spectacle screws is a fraction of that size (generally 1.2mm or 1.4mm dia)

[grendel]

Like these.

[grendel]

looking on ebay there are assortment sets of 1200 pieces with everything from m2 to M4 for not too much.
https://www.ebay.co.uk/itm/166400753384?hash=item26be41fee8:g:qdYAAOSwsKtlO-ai&amdata=enc%3AAQAIAAAA8AAfs3HCO8r81ecKU3xO7Fe2NzrbIUhOQZ5zu9zdNYVtkBpcvxNP0nhTMnpR2T9gd9wuriqHbf5H%2FOBjyLE90Ri%2FIajjsPBuvT4MRyvh8V2cY6%2BVXyNYwJ27nk7OzzttFj3YuB729UuW7JTxKcMZUoAfP5%2B%2B5a4Ll9GtfCa7R2JW6a367WtAQJApt85s7oginDXxZeregt%2BMZq0i14O2MAhUXLHNZp%2F5VZJfwLbfY3fwSQ%2Bc0vOnrbP0t4wsbMMk1Lq4wsIjw2KRYxyqkLQ69j5xKJlUr%2FhyXfeBvAawTlC07QQ4Ykp0CDJuNOa5XvtOYQ%3D%3D%7Ctkp%3ABFBM0M_h_vhi

[roycv]

When looking for these in the past I searched everywhere it seems, until I realised you have to look for Bolts and Nuts.
Roy

[mrzippy]

'All Screwed Up' in Leicester are my local supplier where I buy modeling size, M2 upwards nuts and bolts, over the counter -
usually stainless - bolts (including cap heads), washers, spring washers, half nuts/full nuts, Nyloc nuts etc. 
I've pointed many modellers and motor cyclists in their direction over the years for great service and vast stocks at good prices.
They have an online shop and take orders by phone, how this works out cost wise etc I've no experience.
Paul.

[Circlip]

elongated box on top LH side of page, immediately under the date title, just typed 'Small bolt and nut suppliers' and pressed the button.


 WOW, what a wonderful feature.


  Regards  Ian.

[Dave_S.]

I've been using these people for some years, always reliable: https://modelfixings.co.uk/fixings.htm

[tassie48]

Wow thanks crew lots to look up much appreciated all the input lots of research and purchasing coming up again to everyone many many thanks tassie48

[Mrs Stav]

Have a look at component shop they have a good range and not to expensive as well




Mrs Stav

[ballastanksian]

When I lived in Bognor Regis, Squires was a twenty minute walk away from home! They do a selection of wee ironmongery, certainly in brass but maybe in SS as well.

[Colin Bishop]

Yes, I go into Squires fairly often but the stock levels of things like nuts & bolts can be a bit hit or miss. Love just browsing though and always emerge with a lighter wallet and a bag of bits which 'might come in useful' only to find all too often that I've already got some at home....

Colin

[John W E]

hi ya there


Try this Company.   I haven't purchased nuts and bolts from them, but, I have purchased some electrical stuff from them.


They do a good selection of nuts and bolts.


John


Hardware Sale Items (bclstore.co.uk)