Model Boat Mayhem

Please login or register.

Login with username, password and session length.
Pages: [1]   Go Down

Author Topic: Sailing boat for beginner  (Read 1447 times)

Abandon Ship

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 27
  • Model Boat Mayhem is Great!
Sailing boat for beginner
« on: August 15, 2024, 04:41:42 pm »

Hi all,


I've been messing around with RC powerboats for a while now and would like to try sailing as well. I've no experience with sailing (full size or RC) so would like to get a boat I can use to learn the basics.
I'd be sailing on an enclosed pond so the boat can't escape but the depth is only about 6 to 8 inches around the edge so not room for a deep keel. I'd prefer RTR to kit or plans for my first attempt


Any recommendations?


thanks
Dave
Logged

MikeMcP

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 41
  • Model Boat Mayhem is Great!
  • Location: Leighton Buzzard
Re: Sailing boat for beginner
« Reply #1 on: August 15, 2024, 06:00:14 pm »

you may struggle with a yacht in such shallow water
Logged

SteamboatPhil

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 2,981
  • Location: Dieppe, France
Re: Sailing boat for beginner
« Reply #2 on: August 15, 2024, 06:23:17 pm »

I believe there was one called "Micro Magic" and also one called a "footy" Guess how long that one was... :-))  they might be right for you
Logged
Steamed up all the time

JimG

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 1,353
  • Model Boat Mayhem is Great!
  • Location: Dundee
Re: Sailing boat for beginner
« Reply #3 on: August 15, 2024, 08:10:36 pm »

You will be looking for an old fashioned pond yacht with a full length keel for that depth of water. Most of the modern yacht designs have a deep keel which won't work.
Jim
Logged
Dundee Model Boat club

Abandon Ship

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 27
  • Model Boat Mayhem is Great!
Re: Sailing boat for beginner
« Reply #4 on: August 15, 2024, 09:16:44 pm »

Hi Phil, I've looked at the Micro Magic already - out of my budget for a "try it you might like it" boat. Seen some plans for a footy, might have a go at a build if RTR not available.


Hi Jim, the pond was built for model boats about 120 years ago, so old fashioned pond yachts would have been order of the day. Might have to build one as can't seem to find RTR.


Looks like rain tonight so might go over and do a proper depth check tomorrow morning to confirm my 'guestimate' of 6 to 8 inches deep


By the way, I have considered the Joysway Binary Catamaran because of the pond depth (although I would prefer a monohull) - any thoughts?


Dave
Logged

Ralph

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 186
  • Model Boat Mayhem is Great!
  • Location: Perthshire
Re: Sailing boat for beginner
« Reply #5 on: August 15, 2024, 09:51:19 pm »

A cat probably isn't a.good.choice to start with, you need to be lightning quick on the controls - an unexpected gust and it's.over before you know it and they don't self right. 


As Jim says, a traditional hull is probably best, even then you might need a.pair of wellies just to be on the safe side.


Ralph
Logged

KitS

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 733
  • Getting back into the hobby after years adrift...
  • Location: Lydney, Glos. UK
Re: Sailing boat for beginner
« Reply #6 on: August 16, 2024, 01:18:56 pm »



A cat probably isn't a.good.choice to start with, you need to be lightning quick on the controls - an unexpected gust and it's.over before you know it and they don't self right. 



True, they don't.  :((


Don't ask me how I know this..........


But on the other hand with almost no depth of water a cat won't go all the way over, one hull will be clear of the surface.  :-)
Logged
Regards
Kit

Abandon Ship

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 27
  • Model Boat Mayhem is Great!
Re: Sailing boat for beginner
« Reply #7 on: August 16, 2024, 04:27:44 pm »

Thanks for your replies, been back to the pond with a ruler!
At the edge it's typically about 8 inches deep, gets deeper further in. a water mark around the edge shows that normal depth is about 10 inches.
Anyone know if a Micro Magic will float OK in 10 inches? (or other recommendations for that depth?)


Thanks
Dave
Logged
Pages: [1]   Go Up
 

Page created in 0.114 seconds with 22 queries.