Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length.

[Backerther]

Like real block-style construction of the hull, assembly has come to the stern block at last at which I checked sufficiently how to install the rudder linkage in this portion.
The next job is to build into the whole hull assembly . ♪～♩～♬～

[Backerther]

At last, whole hull sections were completely jointed without difficulty.  ♩～♬～♪～　So roomy inside the hull.！！
A Mabuchi 540RS motor looks so tiny in the hull bottom.
Oh,don't say " not challenging". 3D printed kit may be such and such, and helpful for a lazy old man like me.
A Quick build RC model like this 3D has been earning generally a good reputation for easiness and time-saving in mainly RC planes. But in recent days,3D models appear rapidly to expand its territory in model boats in the form of kit and various kinds of
parts and components with various scales....What is better, they are precisely built up in the models....
I wonder how the skilled and experienced RC modellers in the conventional /traditional style of model makings will think of..??

[Backerther]

The building work is going onto the bridge ass'y.   One of the easiest work in the easiest model boat building I have ever experienced.   The rest of the time could be distributed this day to swimming at my local gymnasium for 2 hours with my old wife.
 
The bridge ass'y was soooooo easy to build and I could do it precisely as per the instruction manual just like a Tamiya pla-model.   CA did a very good job for jointing them which did not require the rigidness in this assembly.

[Backerther]

After coming home from swimming pool where I spent for 2 hours energetically, I re-started building the boat to see how it looks with the bridge ass'y on the upper deck........................????   I couldn't come to love the profile........Toooo massive and something shapeless for my eyes though I had known it previously, vaguely and conceptionally...
But actual profile sitting in front of me....not shapely in exchange for roomy inside of the hull...???

[Backerther]

In order to get the hull looked more shapely, I just cut out the wave-shield like frame partially of the portside foredeck as seen in the pics below. I personally think it better by the elimination of the part since the foredeck turns out to be sharp and shapely than starboard still left unchanged.
Another significance to eliminate the part is intended to give a scheduled dual-purpose gun a required firing angle against the air and the surface targets.

Well then, let's go to the starboard as well.!!!!

[derekwarner]

Certainly alters    the profile Kiyo,........[which I personally did not dislike], but it will also marginally reduce 'sail area' or 'windage effect' 


Have you decided on the "Bushmaster" cannon?....that would be prototypical as used by US Allied Forces.....[IJN included?]


Derek

[Backerther]

Derek,
Our Maritime Safety Agency( so-called Coast Guard) is adopting Bushmaster Mk44 in some patrol boats.
And my current building patrol boat is what I call "Super- Guardian class (Austal 40) patrol boat" which new type of boat is intended to be faster in its cruising speed and a more powerful armament quite different from its 1/1 counterpart.
As for the model armament, it's a bit difficult to find the on-board Bushmaster chain gun currently at around 1/35-1/38 at reasonable price. The building budget for this boat is extremely limited by which I have to find a budget-friendly gun to be set aboard the foredeck neatly and realistically..  But I found it already which might be shown here later at around early October...

And cruising speed is also so important for me to realise since the new boat is destined to serve in a vast area of our lake which has been posted frequently here in this forum. Unless the speed is accomplished, the time required to go around the "patrolling area"
will be sooo long and irritating for me to operate on the shore.
This vastness like the Pacific Ocean? has always obliged me to build a bit fast model boats thus far...
Yes, they are really radio-controlled from the distant place.!

Kiyo

[Backerther]

Well then, back to the mainstream of this building process, both sides of wave shields at the foredeck were just trimmed off for securing a stylish profile and a sufficient space for installing a powerful armament as seen in the pics below.
The new profile looks much better for my eyes .  Anyhow good-looking in my sense of beauty in ship profile.


The last pic is before trimming off, on which Derek commented that he didn't dislike....

[Backerther]

Now the main hull ass'y is fundamentally complete after remolding neatly both side handrails of the hull around the foredeck as seen in the pics below. By this remolding work, she could have a powerful armament on the foredeck in the near future.
Priming and puttying work will be done just before painting to be scheduled on early October.
As the hull is complete and next work is succeeded to installing a driving mechanism in the hull.