Topic: 1/96 HMS Alacrity Type 21 (Read 8007 times)

T888 · « **Reply #75 on:** December 09, 2025, 08:57:23 am »

Painted the funnel section, now comes the fine detailing

T888 · « **Reply #76 on:** December 09, 2025, 08:59:31 am »

Davit which will be fitted to the forward part of the funnel superstructure.

T888 · « **Reply #77 on:** December 14, 2025, 04:42:17 pm »

Further update

T888 · « **Reply #78 on:** December 15, 2025, 09:59:09 am »

Another small fitting made

T888 · « **Reply #79 on:** December 16, 2025, 08:44:39 am »

Working on the Aft mast

T888 · « **Reply #80 on:** December 17, 2025, 10:57:57 am »

Top of the aft mast made, to keep the top weight down I made this using 3.8mm plastic rod the added plastic tube for the antenna heads. These were machined to shape. The final bit to be added is the top aerial which I’ll make using fine copper wire.

T888 · « **Reply #81 on:** December 19, 2025, 08:39:36 am »

SCOT Dome platforms made from 0.75mm card and 4mm tube. All so I can keep the top side weight as low as possible.

Capt Podge · « **Reply #82 on:** December 19, 2025, 10:49:08 pm »

All looking good so far David - keep it coming

Cheers,

Ray.

T888 · « **Reply #83 on:** December 20, 2025, 02:12:19 am »

Thanks and Will do Ray

T888 · « **Reply #84 on:** December 21, 2025, 05:12:05 pm »

Pelorus fitting

News:

Author Topic: 1/96 HMS Alacrity Type 21 (Read 8007 times)

T888

Re: 1/96 HMS Alacrity Type 21

T888

Re: 1/96 HMS Alacrity Type 21

T888

Re: 1/96 HMS Alacrity Type 21

T888

Re: 1/96 HMS Alacrity Type 21

T888

Re: 1/96 HMS Alacrity Type 21

T888

Re: 1/96 HMS Alacrity Type 21

T888

Re: 1/96 HMS Alacrity Type 21

Capt Podge

Re: 1/96 HMS Alacrity Type 21

T888

Re: 1/96 HMS Alacrity Type 21

T888

Re: 1/96 HMS Alacrity Type 21