Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length.

[Detomo]

Hi Peeps ,


Need some advice , trying to set up my electrics in my boat before I install inside the hull.


1. using a p94, connection to a p102 as per diagram for twin motor and bow thruster.
2. also using a p93 for the bow thruster
3. using 3 x 15 amp fuses
4. using 2 x T500 geared motors.
5. using 3 x p95 fuse boards.


I turn on the tran then switch on the p102 the top fuse blows instantly, all the wiring are connected [tight] 
Does anyone know about the fault and how to fix this issue, 


Fellow shipmate Dave






 

[Detomo]

Hi ,


Also the p94 is set on thruster mode 2

[HMS Invisible]

Hi Peeps ,


Need some advice , trying to set up my electrics in my boat before I install inside the hull.


1. using a p94, connection to a p102 as per diagram for twin motor and bow thruster.
2. also using a p93 for the bow thruster
3. using 3 x 15 amp fuses
4. using 2 x T500 geared motors.
5. using 3 x p95 fuse boards.


I turn on the tran then switch on the p102 the top fuse blows instantly, all the wiring are connected [tight] 
Does anyone know about the fault and how to fix this issue, 


Fellow shipmate Dave

#1 task is to use a meter on continuity range to look for a short. Pay particular attention to suppression capapacitor wire touching a motor case.

[Stavros!]

Couple of pictures would help




Stav