Model Boat Mayhem

Technical, Techniques, Hints, and Tips => DC Motors (Brushed) and Speed Controllers => Topic started by: Marks Model Bits on May 04, 2009, 12:03:57 pm

Title: 777 motor
Post by: Marks Model Bits on May 04, 2009, 12:03:57 pm
Hi can anyone tell me what the output shaft diameter is on a Model Motors Direct 777 motor please?
I need to make a coupling and the customer doesn't know what the diameter is.

Thanks,

Mark.
Title: Re: 777 motor
Post by: andyn on May 04, 2009, 12:19:12 pm
4.5mm across by only 5mm long, so you'll have to put the grub screw pretty tight into the rear of the coupling

Andy :-))
Title: Re: 777 motor
Post by: warship1 on May 04, 2009, 02:50:58 pm
Don't the 777 already come with a brass coupling fitted, ready to plug into the universal coupling?
Title: Re: 777 motor
Post by: Ron1 on May 04, 2009, 03:44:39 pm
Don't the 777 already come with a brass coupling fitted, ready to plug into the universal coupling?


They do on my 2.
Title: Re: 777 motor
Post by: andyn on May 04, 2009, 04:14:58 pm
I've got a pair of them, plain shafts.
Title: Re: 777 motor
Post by: DickyD on May 04, 2009, 04:21:03 pm
Don't the 777 already come with a brass coupling fitted, ready to plug into the universal coupling?
They show them on their website as supplied with a brass spline already fitted for connecting to the modular type universal joint,
Title: Re: 777 motor
Post by: Stavros on May 04, 2009, 04:40:33 pm
Well maybee Mark's customer does not like the Dyco type coupling and wants a proper coupling made instead.What tickles me is that a simple question has turned out to be a debate!!!!!!!!!!!!!!!!!


Stav
Title: Re: 777 motor
Post by: andyn on May 04, 2009, 04:44:15 pm
Not really a debate Stav, just about everyone agrees that the Dyco type are overpriced and cause far too much vibration, I don't think I've had one yet that's been spot on straight...

I don't need any more couplings at the moment, but I will go to Mark in future by the looks of things :-))
Title: Re: 777 motor
Post by: barryfoote on May 04, 2009, 06:51:54 pm
Well maybee Mark's customer does not like the Dyco type coupling and wants a proper coupling made instead.What tickles me is that a simple question has turned out to be a debate!!!!!!!!!!!!!!!!!


Stav

Without debate this would be one boring forum!! >>:-( >>:-(
Title: Re: 777 motor
Post by: portside II on May 04, 2009, 10:22:13 pm
I have a couple of 777's and they have a shaft of 4.8mm which is splined A dog to get a drill bit at the time to make a coupling fit .
daz