Model Boat Mayhem
Mess Deck: General Section => Model Boating => Topic started by: ronkh on October 03, 2009, 01:28:53 pm
-
Hello all!
To get back into this hobby after some time out of it (and to make a change from wood), I treated myself to the above boat (boot) the other week and I am now thinking about motorising it.
1:35 scale with a length of 1000m/m
If it is possible, I would like to go for three motors - as it shows with the three plastic props - and just two channel radio.
There are twin rudders and, believe it or not, there is rather a lot of space inside for the gubbins %% O0 %)
Any one out there (as if there wouldn't be!) who could point me in the right direction? :-))
Also, any advice regards working with plastic and wiring it up - how to secure the motors - and the best electronics to use. (I suppose that would mean FLJ?!) ok2
If not, then it will just have to be a nice static model.
Many thanks in advance.
Ron.
-
Ron, just out of interest and not to help with the hardware but if you have a look at the October issue of Tamiya Model Magazine International there is an article about building this kit as a static model. I'm sure there will be some interesting hints there and, as always in this magazine, the finished article is superb.
-
There are some images here;
http://www.modelboatmayhem.co.uk/forum/index.php?topic=13854.0
-
Three build logs here;
http://www.rcgroups.com/forums/search.php?searchid=21385763
-
As my boys would say; Cool! Thanks for those. :-))
Ron.
-
Dave Abbott has motorized this kit with 3 motors I believe, and it appears in decembers model boat magazine. It truely is a work of art!!!!
-
I,m doing one of these at the moment,i,m only fitting 2 x400 motors with only the big centre rudder wihch i have made slightly oversize,the centre prop will be fitted but this will be free running,i,m using the 2mm prop shafts from SHG,
Wullie
-
Hi Wullie,
Are you doing a build or thinking of one?
I might do one myself but it will take a long time.
Ron
-
Hi Ron,I,ve started the build,i,ve got the hull put together, and am about to open up the hull to accept the prop tubes and fit the motors,i,m having a prob listing pics,at the mo, but once i suss out what i,m not doing right i,ll post the pics
Wullie
-
This is the TJ S-100..same scale as the Italeri