Model Boat Mayhem
Mess Deck: General Section => Chit-Chat => Topic started by: Aydemir on January 13, 2010, 10:41:33 pm
-
Hello pals, I have some pictures I just start to build. Micro mahogany classic speed boat. Hull prototype made by foam then framed.
After I start to plank with mahogany veneer strips. I use mini car seats for driver seats. After planking I was dig to foam and empty
inside hull for micro rc car receiver, motors and batteries. I already set shaft, prop and rudder. I will try to set motor receiver and micro
direction unit inside hull. I have to set 2.4 volt mini nimh batteries inside the hull also. This boat size L 14.5 cm ,W 5.0 cm and H 4.0 cm
Regards for everybody. Aydemir
-
Micro Mahogany more pictures.
-
Pictures 03
-
pictures 04
-
Hi- lovely clever little model you've made there- I hope you varnish them too...?
Try replying to your own thread- not creating others.
Greg
-
That bear could do with some training in self defence {-) {-) {-) %%
Cheers
Danny
-
Greg sorry I am new in this forum and trying to get familiar. Just started If you are interested I have another boats finished.
Just type Zodiac Cabin inflatable then see my other boats there. Thanks again.
-
Hey Danny thanks for pictures lovely. I love Bears .Regards.
-
***Topics Merged***
-
Hello, there are some more pictures... :-))
-
More pictures... :-))
-
Hey everyone there are some more pictures. I just start to install RC Inside the boat, there is motor, PCB and tiny servo.
-
More pictures....
-
Two more pictures....
-
Hello again pals, anyone can tell me how can I include that blue NEW sign when I send some new pictures or toppic to the forum.
Thanks and regards...
-
Hello again pals, anyone can tell me how can I include that blue NEW sign when I send some new pictures or toppic to the forum.
Thanks and regards...
It just happens...
-
Motor and drive gear...
-
more pic
-
Here - you're not a gynocologist are you %) %)
Danny %%
-
Hello Danny Unfortunately I am not. But I am a good Carpenter also I worked Jewellery company back then. I am just challenging by myself.
I like to make something different also I love model boats. Thanks and regards....Aydemir :}
-
Hello everyone, I just installed radio receiver and still working on this little boat. Regards for all. Aydemir %)
-
two more pictures.
-
Hello again... there are some more pictures I just start to planking to deck, receiver and rudder system setup finished. Little more work
for finishing. Regards for all. Aydemir
-
Two more pic. %) :}
-
Very nice :-))
-
Hey pals my little boat almost done. Today I finished planking. I have to varnish this little
Baby now and will be ready for journey... %) {-) Regards for all. Aydemir
-
Very nice job there pal. :-)) O0 O0
-
My little Boat have a big sister 30 inches, little one 5 3/4 inches. Some pictures to compare.
Regards for all. :o :} {-)
-
Amazing :-))
ken
-
Not finish yet but getting better.. %) :} {-)
-
Hello guy's I start to make brass fittings. Until now I made 2 PCs Horn, 4 PCs Cleat and flag base finished. Also windsheld frame by brass wire
I used to made. Thanks to my little rotary Black & Decker RTX tool. Very handy for this job. Regards for all Aydemir %) O0 {-)
-
Hello guy's I was working my little boat deck fitting this days and finaly finished.
There are some pictures hope you will like them. Regards for all. Aydemir %) O0 {-)
-
More pictures. ;D :}
-
Quite wonderful! O0
-
absolutely brilliant !!! :-))
-
Superb Job Aydemir :-)) O0 O0 %%
-
Thanks for everyone for comments and lots of regards for all. Next step will be light for the boat I have some
micro LED from old cellular phone I will try to soldering them and install. Thanks Again Aydemir
-
Great little boat.
For lights, had you considered fibre optic? I have used them in the bridge of my current project, here:
http://www.modelboatmayhem.co.uk/forum/index.php?topic=17422.50
Ian
-
Hello everyone... Yesterday I was in the Central Park and my little boat start to learn
how to float under my Zodiac supervision.....Regard for all....Aydemir
-
spring start
-
Beautiful in every way mate- well done.
What are you going to do next a live steam Titanic that fits in a jam jar?
Greg
-
did you take those seats out of a toycar? Anyway about the model, that's just amazing. I wish I was able to make a hull like that myself.
-
Hello everyone, finally I made a video for my little boat there is a link for this video.
http://www.youtube.com/watch?v=3ybdV89Kzgs
-
Another video for rudder & prop. :-)) :} {-)
http://www.youtube.com/watch?v=SmJlv122fak&feature=channel
-
It's turned out really well Aydemir,and she sails well too.Well done sir. :-)) :} O0
-
Thank you for you Dreadstar O0 There are some pictures also from yesterday.Regards
Gondolier also thanks to you for your comments, Minime sorry for late answer seats are taking from a diecast mini sports car. I dont want
to make them again and easy way to go.Regards again.
-
more pics :} {-)
-
Hello pals, I have some pictures I just start to build. Micro mahogany classic speed boat. Hull prototype made by foam then framed.
After I start to plank with mahogany veneer strips. I use mini car seats for driver seats. After planking I was dig to foam and empty
inside hull for micro rc car receiver, motors and batteries. I already set shaft, prop and rudder. I will try to set motor receiver and micro
direction unit inside hull. I have to set 2.4 volt mini nimh batteries inside the hull also. This boat size L 14.5 cm ,W 5.0 cm and H 4.0 cm
Regards for everybody. Aydemir