Model Boat Mayhem

Technical, Techniques, Hints, and Tips => Radio Equipment => Topic started by: firedup on April 17, 2010, 07:44:26 pm

Title: Giant Cod 2.4 servo reversal
Post by: firedup on April 17, 2010, 07:44:26 pm

Could anybody please explain how to change the direction of rotation on the servos so that the rudder does in the correct direction?

Title: Re: Giant Cod 2.4 servo reversal
Post by: craftysod on April 17, 2010, 07:49:22 pm

On the front of your transmitter there are  switches at the bottom.select rudder one and flick switch up or down to reverse the servo
Mark

Title: Re: Giant Cod 2.4 servo reversal
Post by: firedup on April 17, 2010, 08:14:08 pm

Need to add that its the 6 channel set sorry

Title: Re: Giant Cod 2.4 servo reversal
Post by: Netleyned on August 04, 2010, 09:59:50 am

Having just set up a yacht with GC gear Mode 2 which gives a ratchet on the sail servo (handy) Left hand stick
I found I could not get the rudders to turn the right way in either position of the rudder servo reverse switch
Then Eureka! I realised that the Tx is designed for aircraft.
Aileron servo reverse to normal rudders turned right way  Simples!

Ned

Title: Re: Giant Cod 2.4 servo reversal
Post by: Terryt on August 04, 2010, 10:13:26 am

Ned. You are not alone. I had the same problem with my Planet 2.4 gig set, took a while for the penny to drop.

Regards, Terryt.