Model Boat Mayhem

Mess Deck: General Section => Model Boating => Topic started by: Patrick Henry on May 06, 2010, 11:00:47 am

Title: Hull info....?
Post by: Patrick Henry on May 06, 2010, 11:00:47 am

Gentlemen...I'm after a small hull/deck, preferably in abs, but really lightweight f/glass will be ok. No bigger than 16"x8", fairly shallow 'V' design and capable of having just a flat deck with a taped down hatch.

(http://s4.postimage.org/mRmP0.jpg) (http://www.postimage.org/image.php?v=aVmRmP0)

Something similar to the attached pic of Thimble...any ideas as to who makes such a thing at a SENSIBLE price! I've seen one or two hulls priced at absolutely silly money around the 'net, well over £70 mark...silly money for a small hull.

Any ideas, chaps?

Ta,

Rich

Title: Re: Hull info....?
Post by: andyn on May 06, 2010, 12:04:49 pm

13" long, 5.5" wide at the transom. Yours for a fiver plus postage. Installation would be a little tight, but this week only Heliguy have a suitable motor for it for £9.99 and you can get a esc off ebay. It's an ABS hull.

Also got an unused Overlander Kokam 1500mah 11.1v Li-Po that I was going to put in it, plus suitable charger. Yours for a tenner plus postage.

Motor price code at checkout: 'ALmotor50'

http://www.heliguy.com/Extras/Brushless-motors/AL-2215-14-Acer-Lab-3100KV-Motor/

(http://i288.photobucket.com/albums/ll184/andyn_01/DSCN3849.jpg)
(http://i288.photobucket.com/albums/ll184/andyn_01/DSCN3851.jpg)
(http://i288.photobucket.com/albums/ll184/andyn_01/DSCN3850.jpg)

Title: Re: Hull info....?
Post by: Patrick Henry on May 06, 2010, 12:07:55 pm

You have a pm Andy...

Title: Re: Hull info....?
Post by: andyn on May 06, 2010, 12:13:26 pm

12:04:49 - I posted that
12:08:34 - Got your PM :o %)

New Mayhem sales record? I think so 8)

Title: Re: Hull info....?
Post by: Patrick Henry on May 06, 2010, 12:14:55 pm

Not bad eh? Cheers Andy, deal done n' dusted, thanks.

Mods...you may like to remove this post, thank you kindly.

Rich

Title: Re: Hull info....?
Post by: Circlip on May 06, 2010, 12:15:32 pm

Yer not going for another wafter are you Rich??

Title: Re: Hull info....?
Post by: Patrick Henry on May 06, 2010, 12:16:33 pm

Heh heh...watch this space Ian!

Title: Re: Hull info....?
Post by: Circlip on May 06, 2010, 12:20:29 pm

OH B***er , what did I release onto the pond???? {-)

 PS, there was one of the originals on the flee but I lost the link, was going to send it to you.

  Regards Ian.

Title: Re: Hull info....?
Post by: Patrick Henry on May 06, 2010, 12:43:39 pm

Never saw that...naff.  <*<

Title: Re: Hull info....?
Post by: Circlip on May 06, 2010, 12:44:57 pm

Found it again, you got Knee mail  :-))

Title: Re: Hull info....?
Post by: Patrick Henry on May 06, 2010, 01:40:32 pm

Cheers boss...I'm on it.

Title: Re: Hull info....?
Post by: Circlip on May 08, 2010, 07:29:43 am

So, ????????????????????????

 No bids.   ;D

  Regards  Ian.

Title: Re: Hull info....?
Post by: Patrick Henry on May 08, 2010, 07:42:57 am

Ah...well, it's like this you see. I've..err...bought something else.  %)  Something..bigger.   %) All will be revealed when the hull comes out of the mould....



Rich

Title: Re: Hull info....?
Post by: Circlip on May 08, 2010, 07:57:11 am

Little tinker I  specifically didn't have a go.  O0

Title: Re: Hull info....?
Post by: Patrick Henry on May 08, 2010, 07:58:39 am

Sorry Ian...

Title: Re: Hull info....?
Post by: Circlip on May 08, 2010, 08:00:34 am

No probs, it may come up again  :-))

 Must sign out, it's the big H today.

  Regards  Ian.

Title: Re: Hull info....?
Post by: Patrick Henry on May 08, 2010, 08:08:35 am

Enjoy...


Rich