Model Boat Mayhem

The Shipyard ( Dry Dock ): Builds & Questions => Navy - Military - Battleships: => Topic started by: Workboat on September 09, 2010, 12:30:06 pm

Title: Pcf swift boat
Post by: Workboat on September 09, 2010, 12:30:06 pm

Hi anyone out there got any plans ,or the fittings from the caldercraft 1/16 scale pcf craft they want to sell thanks for now Dave.

Title: Re: Pcf swift boat
Post by: longshanks on September 09, 2010, 09:36:50 pm

Dave,

John Lambert has a set of plans for the swift

http://www.lambert-plans.com/

Go to MTBs and its down at the bottom of the page

Title: Re: Pcf swift boat
Post by: HS93 (RIP) on September 09, 2010, 10:20:10 pm

It's a good plan plenty of detail.

peter

Title: Re: Pcf swift boat
Post by: hmsantrim on September 10, 2010, 03:39:06 am

Hi Dave.
            here is my list of Nam sites for PCF.

          http://www.rivervet.com/swifts.htm

         http://www.coastalforcesplans.com/id11.html

         http://www.brownwater.net/Store.asp

         http://www.floatingdrydock.com/ptboat.htm

        http://www.franksmosquitoboathobbies.com/swift.htm
     
        model photos
                   
        (http://s2.postimage.org/uREFi.jpg) (http://www.postimage.org/image.php?v=TsuREFi)


        (http://s2.postimage.org/uRJEA.jpg) (http://www.postimage.org/image.php?v=TsuRJEA)


       (http://s2.postimage.org/uRR80.jpg) (http://www.postimage.org/image.php?v=TsuRR80)


      (http://s2.postimage.org/uRW7i.jpg) (http://www.postimage.org/image.php?v=TsuRW7i)


     (http://s2.postimage.org/uS2BJ.jpg) (http://www.postimage.org/image.php?v=TsuS2BJ)


    (http://s2.postimage.org/uSa59.jpg) (http://www.postimage.org/image.php?v=TsuSa59)

                                         cheers Frank

Title: Re: Pcf swift boat
Post by: Workboat on September 10, 2010, 02:06:54 pm

Hi guys thanks to all that have replyed ,Frank hmsantrim is that you pcf in the pic cheers for now Dave

Title: Re: Pcf swift boat
Post by: hmsantrim on September 10, 2010, 08:13:59 pm

Hi Dave.
          RE: is that you pcf in the pic ..  No its its belongs to a guy in the U.S.  but I have the figures for it. 

             I started making them for some body and then he swaped the boat for some other vessel so I put the figures back in the box.


                                            cheers Frank
         

Title: Re: Pcf swift boat
Post by: red181 on September 11, 2010, 12:20:38 am

Hi Hmsantrim, pls check your messages, I have sent one, thanks :-))

Title: Re: Pcf swift boat
Post by: Workboat on September 12, 2010, 10:10:20 am

Hi Frank thanks for the reply please could you tell me what make and where you got your figures from as I am finding it a problem finding ones that don't need modifying if you want to sell them I may be intrested thanks for now Dave

Title: Re: Pcf swift boat
Post by: Workboat on September 13, 2010, 05:32:38 pm

Hi Frank hmsantrim please can you check your pms  cheers Dave

Title: Re: Pcf swift boat
Post by: mikearace on November 19, 2010, 07:52:07 pm

I had the misfortune to build this Caldercraft version a few years ago, defintely the worst kit I ever built.  Fittings were good up to Caldercraft standard but oh the allegedly die cut wood!!!!  half wasnt cut, half was warped, half was nowhere near a good fit.  But I got there in the end.  However to the point, I had about 4 figures for her that were Verlinden who do a good selection of US marine figures that can be easily adapted.  Very high quality and good range of side arms and poses.