Model Boat Mayhem
Technical, Techniques, Hints, and Tips => BRUSHLESS Motors and Speed Controllers => Topic started by: John Mk2 on May 08, 2011, 12:44:06 pm
-
A mate of mine was running my old App Cat this morning. Going like Stink %% I asked why it was MUCH faster now ? "Bigger 3 blade prop" he said. About 5 mins later it stopped ! A right mess (See pic) wires melted lipo blown ect ect {:-{ Just go's to show what over proping can do <:(
(http://s3.postimage.org/270tlbow4/esc_002.jpg) (http://postimage.org/image/270tlbow4/)
-
By the way it WAS a 120amp (160 burst) on 4s 5000mah , 2075 kv motor.
-
funny that ive just been talking to somebody who has told me the hull was melting too !
-
Yes Mate >:-o Think the resin melted ! All in all a bit of a mess. Lucky the lipo did not go up {:-{
-
sounds like he was lucky to have recovered anything , once grp starts to melt its not long before you have a fire ! time for a completely new boat ?
-
Came very close to a fire the way the lipo puffed up {:-{ It was to big to remove from the sponson (Jammed in) Anyway he's going to let me know if the hull is a right off. Will keep you posted.
-
not sounding too hopeful of being able to salvage the hull then ? is it a model that was being set up for racing this season ?
-
He (like me) dont race ok2 Just a bit of fun on Sunday morning's. But not for him yesterday !!
-
Another picture.
(http://s4.postimage.org/3513wjwkk/esc_001.jpg) (http://postimage.org/image/3513wjwkk/)
-
My My...Those who live by the sword...... :}