Model Boat Mayhem
Technical, Techniques, Hints, and Tips => BRUSHLESS Motors and Speed Controllers => Topic started by: darrencuk on July 29, 2011, 09:11:58 am
-
How do you work out on a brushless outrunner motor how fast there going to be I'm just confussed over the hole thing
-
the motor speed is in Kv if a motor is for instance 2300Kv
that means 2300 rpm per volt
if ya have a 2300kv motor and stick it to a 7.2 battery
you do 2300 X 7.2 = 16560 rpm
-
What happens if u run 7.4 sorry for all questions xxx
-
use the same formula. what motor are you looking at? take the kv mulitply it by the battery volts and theres ya answer
-
Please remember this is only approx Battery voltage can vary as can revs under load. John.
-
Hi , can any one recommend a charger for 5000 mah lipo battery 2cell (2s) 7.4v I'm looking for a mains charger 240v if available,
thanks again,
-
IMAX B6 will charge most batteries. I find them excellent value as they will charge all Lipos, Nimahs, Nicads, Lead Acids, even the new LiFe batteries.
Nige :-)
-
Re IMax B6 charger - http://www.rcgroups.com/forums/showthread.php?t=746574
-
IMAX B6 will charge most batteries. I find them excellent value as they will charge all Lipos, Nimahs, Nicads, Lead Acids, even the new LiFe batteries.
Nige :-)
Been using a B6 for over 3 yr's now on a laptop p.s.u & car battery at the lakeside ok2 Not missed a beat :-))