Model Boat Mayhem

Technical, Techniques, Hints, and Tips => Engineering Techniques and Materials. => Topic started by: Tom@Crewe on August 07, 2011, 08:47:20 am

Title: 4.8mm, 5mm or 3/16 brass rod???
Post by: Tom@Crewe on August 07, 2011, 08:47:20 am
I am looking for 4.8mm, 5mm or 3/16 brass rod but 1M long.

does anyone know a supplier?

B&Q have it but I am told it wont bend or solder as it is not good quality brass!
Title: Re: 4.8mm, 5mm or 3/16 brass rod???
Post by: HS93 (RIP) on August 07, 2011, 09:00:44 am
B&Q stuff is very poor grade very brittle crap on a lathe ok to solder to if you only want short lengths but I take it you want hand rails  give http://www.chronos.ltd.uk/acatalog/Engineering_Menu_Brass_Round_CZ121_371.html   a ring they may be able to supply longer lengths

Peter
Title: Re: 4.8mm, 5mm or 3/16 brass rod???
Post by: HS93 (RIP) on August 07, 2011, 09:10:39 am
Also try   https://maccmodels.co.uk/index.php?cPath=254_53_291&osCsid=e07b658010f7e651120947b71840bfc7  they do cut the rods themselves so may well sell you longer lengths if you ring they have for me. also a member of the forum now I think


peter
Title: Re: 4.8mm, 5mm or 3/16 brass rod???
Post by: Tom@Crewe on August 07, 2011, 10:24:44 am
sent Chronos an e-mail and very quick reply, but they only do 12inch lengths

Still impressed with quick reply and have put them in favourites.
Title: Re: 4.8mm, 5mm or 3/16 brass rod???
Post by: gondolier88 on August 07, 2011, 11:34:25 am
Live Steam Models sell material by the metre.

Greg
Title: Re: 4.8mm, 5mm or 3/16 brass rod???
Post by: HS93 (RIP) on August 07, 2011, 02:07:18 pm
sent Chronos an e-mail and very quick reply, but they only do 12inch lengths

Still impressed with quick reply and have put them in favourites.

don't forget they do free postage as well which is handy also look on ebay as they have a shop on there and there is sometimes a difference in price of larger items,not a lot but worth looking , the mill vice I was buying was £8 cheaper on ebay from them.

Peter
Title: Re: 4.8mm, 5mm or 3/16 brass rod???
Post by: tubby on August 07, 2011, 02:25:55 pm
Have you tried your nearest non ferrous metal supplier for the brass, some will stock it at 3mt lengths, this is how I obtain all my brass and stainless steel, you just cut off what you want.
Barry