Model Boat Mayhem

Technical, Techniques, Hints, and Tips => DC Motors (Brushed) and Speed Controllers => Topic started by: Cornishman on August 24, 2011, 07:24:36 pm

Title: 900 Size Motors
Post by: Cornishman on August 24, 2011, 07:24:36 pm

Just found what appears to be a similar motor that Model Slipway sells as MS-900BB.   Action and Marks Model Bits also sell one as MMB900 that appears to be the same.

I have recently purchased one at £12.00 post free for my Our Lass Kit, and it looks the same, and is dimensionally the same

I don't know how to set up a link but if you go into ebay and search on 12v motor, the Item Number is 300511267976 and the seller is luke the monkey

At £12.00 post free it has got to be good, even though it is SLIGHTLY SHOP SOILED

Title: Re: 900 Size Motors
Post by: Timo2 on August 24, 2011, 07:33:28 pm

Hi

Have a read of    http://www.modelboatmayhem.co.uk/forum/index.php?topic=31962.msg315813#msg315813     <*< <*< <*<

 Timo2

Title: Re: 900 Size Motors
Post by: 6705russell on August 24, 2011, 08:05:03 pm

In all honesty I bought one of these from Marks Model Bits a while back, it went in my 1/16 scale patrol boat, only done about  four hours and it completely burnt out last Sunday, never run at full speed more than a few seconds on each outing and burnt out before it blew the  15 amp fuse....

Russ

Title: Re: 900 Size Motors
Post by: john s 2 on August 25, 2011, 01:09:34 pm

Sounds like a return under warrenty is required.What voltage were you using? Blurb sayes ok up to 24v with cooling.John.