Model Boat Mayhem

Technical, Techniques, Hints, and Tips => BRUSHLESS Motors and Speed Controllers => Topic started by: Bernhard on September 11, 2011, 02:45:02 pm

Title: tacon to Baby Bootlegger
Post by: Bernhard on September 11, 2011, 02:45:02 pm

hi
i Have a Baby Bootlegger 32inch.......... with a 700BB motor and 5000..11,1 lipo  ...will this be ok...if i will go to brushless motor ,,,,Tacon Brushless Motor 1800kv  3660...            eny other ides  Thanks

 ROHS/CE Yes
Watts 1220
No-load Current /7.4V 1.9A
Load Current 44A
No-load RPM 4.5w
Load RPM 3.5W
 Shaft Diameter (mm) 5MM                                                here is my Baby?      http://www.youtube.com/watch?v=M8p34TSSvqU                                 
Kv: 3060rpm/v
Diameter: 40.30mm
Length: 75mm
Shaft diameter: 5mm
Weight: 299g
Battery: 2~3S 3,000mAh
                                                                                                             

Or will this be better             from Hobbyking
Kv: 3060rpm/v
Diameter: 40.30mm
Length: 75mm
Shaft diameter: 5mm
Weight: 299g
Battery: 2~3S 3,000mAh
Standard size mounting holes enable the motor to be installed in a large range of motor mounts.