Model Boat Mayhem
The Shipyard ( Dry Dock ): Builds & Questions => Navy - Military - Battleships: => Topic started by: micknjen on March 16, 2007, 09:19:17 pm
-
Hi we have brought one of these for my perkasa but sound is very poor quality any ideas how to improve? You people are always so helpful thought I would ask another question.
-
Which one did you buy?
;)Richard
-
Robbe
-
Sorry dont know much about the Robbe ones.
I have heard the JJC ones they are very good.
http://www.westbourne-models.com/erol.html#3127X0
Richard ;)
-
Thanks for your help.
-
How big is your speaker?
Barrie
-
Also, Micknjen,
What is the exact problem. Is it lack of volume or reproduction of sound.
Terry.
-
But Perkasa was powered by gas turbines!!
Bob
-
Thank goodness for that I thought it was me that had got it wrong. JJC do gas turbines.
Richard ;)
-
oops got the wrong generator but problem is lack of volume
-
shouldn't you have three of them, No! not a shareholder. ;D
-
Volume problems are usually down to size of speaker, getting the correct sound box (can be a yoghurt type pot or cardboard tube) and allowing the sound to escape the hull/superstructure.
Don't get it too loud and upset all the other sailors ::)
Cheers
Doug
-
Micknjen,
Maplins do a small 3.5w watt amplifier should you need to increase volume to the module.
http://www.maplin.co.uk/Module.aspx?ModuleNo=37734&doy=17m3&c=so&U=strat15 (http://www.maplin.co.uk/Module.aspx?ModuleNo=37734&doy=17m3&c=so&U=strat15)
Terry.
-
A toilet roll cardboard tube actually works very well.