Model Boat Mayhem

Technical, Techniques, Hints, and Tips => Radio Equipment => Topic started by: paul1985 on May 23, 2013, 01:04:12 pm

Title: Fly Sky FS-TH9X
Post by: paul1985 on May 23, 2013, 01:04:12 pm

Hi everybody
Does anybody know if i can that the rotary knob from the HOV.PIT and change it for the three positition toggle switch
is it just a strate swap or not that simple
Thanks
Paul

Title: Re: Fly Sky FS-TH9X
Post by: Martin (Admin) on May 23, 2013, 03:43:02 pm

Usually you can substitute a 'pot' for 2 resisters, utilising the centre tap, but I've never done it myself.... ( take the pot out of circuit, measure the resistance, use 2 resisters of 1/2 the value .)

Also, you may find the Tx may get very confused if it's expecting a variable pot and it finds a 3 position switch but I would say it's worth a try, it shouldn't do any hard!

http://diydrones.com/profiles/blogs/ardupilotcopter-mega-6