Model Boat Mayhem

Mess Deck: General Section => Model Boating => Topic started by: dreams3577 on October 25, 2014, 08:51:24 pm

Title: ProBoat Shockwave 26 EP Rudder Assembly : PRB2104
Post by: dreams3577 on October 25, 2014, 08:51:24 pm

Hi All
I am looking for a replacement rudder for my Proboat shockwave 26 (broken mine today), as per the link below, However I cannot find anywhere in the world that has any available as it is a discontinued item
http://www.revmod.co.uk/ProBoat-Shockwave-26-EP-Rudder-Assembly-PRB2104.html (http://www.revmod.co.uk/ProBoat-Shockwave-26-EP-Rudder-Assembly-PRB2104.html)
Does anyone know anywhere that has one, or do I need to alter the rudder setup to something newer? if so what?
many thanks
Steve
 
 

Title: Re: ProBoat Shockwave 26 EP Rudder Assembly : PRB2104
Post by: hmsantrim on October 25, 2014, 10:50:18 pm

Hi Steve.
 http://shop.smallsize.no/product_info.php?cPath=230&products_id=3774&osCsid=124c1ab2ce084d9d0e0863564984643b (http://shop.smallsize.no/product_info.php?cPath=230&products_id=3774&osCsid=124c1ab2ce084d9d0e0863564984643b)
 if you have just broke the rudder and not the whole assembly you could possibly just replace it with a brass one
 frank

Title: Re: ProBoat Shockwave 26 EP Rudder Assembly : PRB2104
Post by: dreams3577 on October 26, 2014, 04:14:09 pm

Hi Frank
Yes it is just the rudder, A brass one sounds like a good idea, do you know of an alternative brass one? ie a link to one? I cant find any that would fit the current setup.
 
Thanks
Steve

Title: Re: ProBoat Shockwave 26 EP Rudder Assembly : PRB2104
Post by: hmsantrim on October 26, 2014, 07:58:58 pm

 Hi Steve.
   would need to know what the I/D of the tiller arm is.
 
 frank

Title: Re: ProBoat Shockwave 26 EP Rudder Assembly : PRB2104
Post by: Tombsy on October 27, 2014, 04:30:35 pm

Does this one from the Impulse 26 look the same? From the listing it looks like they might be interchangable.


http://www.wheelspinmodels.co.uk/i/115867/ (http://www.wheelspinmodels.co.uk/i/115867/)

Title: Re: ProBoat Shockwave 26 EP Rudder Assembly : PRB2104
Post by: dreams3577 on October 28, 2014, 08:43:38 pm

Hi Brian
If you take a look at the below link you can see what the rudder looks like, very different..
http://shop.smallsize.no/product_info.php?cPath=230&products_id=3774&osCsid=124c1ab2ce084d9d0e0863564984643b (http://shop.smallsize.no/product_info.php?cPath=230&products_id=3774&osCsid=124c1ab2ce084d9d0e0863564984643b)
Thanks
Steve
 

Quote from: Tombsy on October 27, 2014, 04:30:35 pm

Does this one from the Impulse 26 look the same? From the listing it looks like they might be interchangable.


http://www.wheelspinmodels.co.uk/i/115867/ (http://www.wheelspinmodels.co.uk/i/115867/)

Title: Re: ProBoat Shockwave 26 EP Rudder Assembly : PRB2104
Post by: dreams3577 on October 30, 2014, 02:49:38 pm

Hi All

I took some pictures of the broken rudder, the diameter of the shaft is about 6mm

http://dreamstonephotography.com/photos/forumpics/rcboat_001.jpg (http://dreamstonephotography.com/photos/forumpics/rcboat_001.jpg)
http://dreamstonephotography.com/photos/forumpics/rcboat_002.jpg (http://dreamstonephotography.com/photos/forumpics/rcboat_002.jpg)
http://dreamstonephotography.com/photos/forumpics/rcboat_003.jpg (http://dreamstonephotography.com/photos/forumpics/rcboat_003.jpg)
http://dreamstonephotography.com/photos/forumpics/rcboat_004.jpg (http://dreamstonephotography.com/photos/forumpics/rcboat_004.jpg)
http://dreamstonephotography.com/photos/forumpics/rcboat_005.jpg (http://dreamstonephotography.com/photos/forumpics/rcboat_005.jpg)

Thanks
Steve


You can  'Copy'  and  'Paste'  the pictures directly into your letter above.

as per the first picture

Ken


(http://dreamstonephotography.com/photos/forumpics/rcboat_001.jpg)