Model Boat Mayhem

Technical, Techniques, Hints, and Tips => The "Black Arts!" ( Electrics & Electronics ) => Topic started by: Big Ada on September 25, 2015, 01:27:19 pm

Title: New Tug build wiring help.
Post by: Big Ada on September 25, 2015, 01:27:19 pm

I have built a new Tug with one main motor driving the Prop powered by a 12v battery via a 50amp Tornado ESC plugged in to a 2.4 RX. I have also got in it a home made 6v Bow Thruster powered by a 6v battery via another 50 amp Tornado ESC plugged in to the Same RX.
Is this correct and do I have to remove the Red wire from the Thrusters RX plug?.
I do hope this makes sense. I have only tried out the Main Motor and Rudder, I have not plugged in the Thruster to the RX yet.

Thanks for any help.

Len.

Title: Re: New Tug build wiring help.
Post by: Netleyned on September 25, 2015, 01:59:22 pm

In a word Yes  :-))
Ned

Title: Re: New Tug build wiring help.
Post by: Martin (Admin) on September 25, 2015, 02:33:04 pm

 
Also see:  http://www.modelboatmayhem.co.uk/forum/index.php/topic,51499.msg527357.html#msg527357