Model Boat Mayhem
Technical, Techniques, Hints, and Tips => The "Black Arts!" ( Electrics & Electronics ) => Topic started by: andyram on January 01, 2016, 12:55:02 am
-
Greetings one and all,Happy New Year.
Can a kind soul offer a suitable wiring diagram for Our Lass II.Requirements as follows.
2x 12v 7amp batteries linked together with a charge point.
Motor.
Bow Thruster.
Option to add leds.
Prefer to use ACTion electronics for all the above.
Sound unit will be a Technobots unit.
Thanks all and best wishes for a good 2016.
Will.
-
Hi Billybunter
Check the link below
http://www.action-electronics.co.uk/ms.php
hope this helps
Spud
-
Cheers Spud,
It,s certainly a help but unsure what size esc for the bow thruster and likewise the 900 motor.Also unsure how to link two 12/7 batteries with a charge point safely.
Thanks for your help.
Will.
-
Hi will,
When I had one i used a 25 amp speed controller for the main drive motor, 10 amp for the bow thruster. But I fitted a car fan heater motor.
Also I removed all of the batteries just to lift it out of the water due to the weight of it ,no need for a charging point (sorry I can't help )
Good luck with your build
Spud
-
Also unsure how to link two 12/7 batteries with a charge point safely.
http://www.action-electronics.co.uk/pdfs/On-Board%20Charging.pdf (http://www.action-electronics.co.uk/pdfs/On-Board%20Charging.pdf)
-
Thanks both for your help.
Now you mention it Spud I may have a change of plan.Whilst it,s very neat to have the batteries etc. all in situ I had,nt thought through the practicalities of lifting the boat.
Shoul d there be any other OL11 builders reading I would welcome your input,advice,pictures of your layout etc.
Thanks,Will.