Model Boat Mayhem

Technical, Techniques, Hints, and Tips => Radio Equipment => Topic started by: cos918 on December 04, 2016, 09:24:41 pm

Title: F14 receiver battery
Post by: cos918 on December 04, 2016, 09:24:41 pm

Hi all
I have a robbe futaba FP-R118F receiver. It has 8 channels and a DSC . Ch 8 is marked as both ch8 and battery. I am looking to use all channels . So for Channel 8 could I use a Y lead and plug a servo and RX battery or BEC  in to ch 8.
many thanks


John 

Title: Re: F14 receiver battery
Post by: unbuiltnautilus on December 04, 2016, 09:27:17 pm

Yup :-)) ..maybe with a switch harness in line too..

Title: Re: F14 receiver battery
Post by: HMS Invisible on December 04, 2016, 09:44:56 pm

5volt or  6 volt bec can go into any of the eight channels and if you unscrew the case you can tell whether or not it is ok on the DSC slot.

Title: Re: F14 receiver battery
Post by: cos918 on December 04, 2016, 09:47:54 pm

thats perfect . Thanks for the answer


john