Model Boat Mayhem

Mess Deck: General Section => Chit-Chat => Topic started by: frogman3 on July 02, 2019, 07:49:03 pm

Title: CAM BELT DRIVE MOTOR MOUNTINGS
Post by: frogman3 on July 02, 2019, 07:49:03 pm

HI ALL does anybody know if you can buy the cam belt drive motor mountings made by MFA ? OR WHERE I CAN GET SOME ?
Chris

Title: Re: CAM BELT DRIVE MOTOR MOUNTINGS
Post by: DaveM on July 02, 2019, 11:15:10 pm

https://mfacomodrills.com/gearboxes/gearboxes.html (https://mfacomodrills.com/gearboxes/gearboxes.html)
Click on 960D and 965D Series Belt Reduction Units. The older type 'Olympus' belt drive for 540 series motors was discontinued some years ago.
DaveM

Title: Re: CAM BELT DRIVE MOTOR MOUNTINGS
Post by: petermun on July 03, 2019, 08:12:03 am

Try S.H.G. Model Supplies, Pete

Title: Re: CAM BELT DRIVE MOTOR MOUNTINGS
Post by: frogman3 on July 03, 2019, 09:30:40 am

Cheers guys I'll have a look  :-))
chris

Title: Re: CAM BELT DRIVE MOTOR MOUNTINGS
Post by: grendel on July 03, 2019, 12:18:16 pm

if you want to create a dual drive cambelt gearbox you will probably neen the below from MFA Como:-

Bearing Blocks
Part No. 919D30 5mm I.D.
(19.06 x 19.0mm x 10mm) 32g
Part No. 919D30/1 6mm I.D.
(20 x 20mm x 12.5mm) 32g
Part No. 919D30/2 8mm I.D.
(19.0 x 19.0mm x 13.0mm) 32g

Part No. 918D10.
Bearing Blocks. 4mm I.D.
(20 x 20 x 12.5mm) . 32g, extra pulleys and longer belts