Model Boat Mayhem
Mess Deck: General Section => Chit-Chat => Topic started by: ajb63 on July 05, 2020, 09:56:42 am
-
Hi
Going to be in the Brixham Torbay area next week.
Can anybody recommend a Model boat shop that's able to supply me with replacement motor/ propshaft universal coupling. Only require red plastic centre part . Have stripped splines in mine. Can't find suitable shop on web. Thanks for any info.
Alan
-
Not sure about Torbay shops but Steve sell them individually.
https://www.modelboatbits.com/UNIVERSAL-COUPLINGS-1 (https://www.modelboatbits.com/UNIVERSAL-COUPLINGS-1)
-
Not too sure if there are any model shops around Torbay. You might get one from Nimrif in Plymouth. Details on internet.
-
I believe this is what you're looking for :
https://www.cornwallmodelboats.co.uk/acatalog/couplings-modular.html
Regards,
Ray.
-
Hi Alan, why did it strip the splines in the first place?
What I do to strengthen the joint is to slide 2 coupling size heat shrink tubes
Over the joint and shrink down, creates a more secure coupling.
Works for me anyway.
John
-
Hi John
Only in water for 5 minutes, loud motor squeal. Got back in and port side motor had no drive. Propshaft still still turned by hand , so only assume that something got wedged underneath and jammed propeller . Motor seems OK. Only enquiring about Torbay shop as it would be convenient as in area.
Alan
-
Your best bet might be Bekra Models at Newton Abbot but you might want to check with them beforehand as it re-opens today after lock-down with a new owner and I don't know if it is carrying the same stock as before. The website is down but if you Google Bekra you get a phone number.
Antics Models in Plymouth should also have that sort of thing.
-
I have loads of these spare as i now use silicone tube instead.
If you pm me your address I will send you a couple.
Bob
-
Thanks Allnightin, got coupling from Bekra model shop. And to Bob for kind offer.
Alan