Model Boat Mayhem

Technical, Techniques, Hints, and Tips => Radio Equipment => Topic started by: rnli12 on January 09, 2021, 04:07:45 pm

Title: HITEC Laser6 - Battery
Post by: rnli12 on January 09, 2021, 04:07:45 pm

Hi,
Can anyone help identify the battery connector on a Hitec Laser 6 NICAD battery replacement for me please and where best to source one from.
Many thanks,
Rich

Title: Re: HITEC Laser6 - Battery
Post by: RST on January 09, 2021, 04:57:08 pm

I'm no expert but just looked at component shop and you can select transmitter batteries (NiMH) and select the type of connector, pics and specs provided and look like yours.  If in doubt add a comment on the order.

Title: Re: HITEC Laser6 - Battery
Post by: JimG on January 09, 2021, 08:29:57 pm

I think these are a type of Molex connector, often described as a JR connector as these were used in JR transmitters. A common JST connector (normally red) will also fit as the pin separation is the same although you need to be careful to connect it the right way.
Jim