Model Boat Mayhem

Technical, Techniques, Hints, and Tips => The "Black Arts!" ( Electrics & Electronics ) => Topic started by: 17-09 on September 25, 2022, 04:54:16 pm

Title: JCC sound units
Post by: 17-09 on September 25, 2022, 04:54:16 pm

Hi,
 I have inherited a model with a JCC PE307 unit, it is connected to a TE306 unit. The power seems to come from the receiver but there is also a Robbe Multi switch decoder installed, I have two female sockets and a male socket that are not connected to anything. When powered up the red lights illuminate on the two units so I do have power to them. There is a home made board wired in which I know has gunfire and other sounds and the PE307 is wired to a speaker. Does anyone know how I connect the two females and male connectors please, or can supply a wiring diagram, I cannot get anything from the internet about JCC. Many thanks
 17-09.

Title: Re: JCC sound units
Post by: Umi_Ryuzuki on September 25, 2022, 05:50:50 pm

Here are the instructions for a 310 unit.

Title: Re: JCC sound units
Post by: Umi_Ryuzuki on September 26, 2022, 07:21:49 pm

Slave Unit Instructions.  :-)

Title: Re: JCC sound units
Post by: Umi_Ryuzuki on October 06, 2022, 10:10:17 pm

Haah,... I found a copy of the JJC Master Sound Module instructions.
Now a nice scan for all to use.   :-))

Title: Re: JCC sound units
Post by: frogman3 on October 14, 2022, 12:29:21 pm

WELL i hear yrs ago that JJC have gone out of bussiness so you wont find anything about them on the web
chrisb