Model Boat Mayhem

Mess Deck: General Section => Model Boating => Topic started by: tassie48 on November 14, 2023, 09:52:30 pm

Title: After a good quality speed controller like the old Electronize type
Post by: tassie48 on November 14, 2023, 09:52:30 pm: I use to big a big fan of the old Electronize speed controllers and are looking for a suitable replace to these ones 30 Amp plus would be ok I do like the easy way that they operated and keep on going any suggestions to a suitable replacement unit thanks in advance crew tassie48
Title: Re: After a good quality speed controller like the old Electronize type
Post by: Fred Ellis on November 15, 2023, 05:34:28 am: Hi Tassie48
I have found these to be good. Hobbywing quicrun 1060 , I am replacing all my esc with them. I have used them with 6V and 7.2V battery's.
Specs:
Fwd. Cont. / Peak Current: 60A/360A
Rev. Cont. / Peak Current: 30A/180A
Voltage Range: 2-3S Lipo or 5-9 NiMH
Motor Limit: 2S Lipo or 6 NiMH; 540 or 550 Size Motor: ≥12T or RPM
3S Lipo or 9 NiMH; 540 or 550 Size Motor: ≥18T or RPM< 20000 @7.2V
Resistance: Fwd 0.001Ω, Rev 0.002ΩBEC
Output: 3A/5V (Linear Mode)
PWM Frequency: 1KHz
Size: 36.5mm x 32mm x 18mm
Weight: 39gRunning
Modes: Forward/Reverse/Brake, Forward/Brake, Forward/Reverse
Cars Applicable: 1/10 Touring Car, Buggy, Short Course Truck, Monster, Truggy, Rock Crawler and Tank
Title: Re: After a good quality speed controller like the old Electronize type
Post by: philk on November 15, 2023, 07:19:21 am: Nearest I've found to electronic for ease of use and reliability is the jp marine blue metal cased ones not the cheapest but I've got about 15 and never let me down
Title: Re: After a good quality speed controller like the old Electronize type
Post by: NickelBelter on November 15, 2023, 07:53:46 am: I really love Dimension Engineering ESCs, I have them in every boat with brushed motors.

https://www.dimensionengineering.com/products/syren10 (https://www.dimensionengineering.com/products/syren10)

They have a 10, 25 and 50 amp single controller.