Model Boat Mayhem

Technical, Techniques, Hints, and Tips => The "Black Arts!" ( Electrics & Electronics ) => Topic started by: ronnie42 on January 05, 2024, 09:59:25 am

Title: waterproof electronics
Post by: ronnie42 on January 05, 2024, 09:59:25 am

Bought a few switches, going to try to waterproof one . The shrink-wrap around the little board is probably just for an anchor for the cables. Have cycling lights that the Led electronics are coated in epoxy resin to keep the rain outWorth a try as the switch is going to get wet if I forget to run run the pump as they will sit low down in the hull .https://www.componentshop.co.uk/p115-micro-single-switcher.html.htm (https://www.componentshop.co.uk/p115-micro-single-switcher.html.html)
And this https://www.mr-rcworld.co.uk/shop/4-port-sequential-switch-/ (https://www.mr-rcworld.co.uk/shop/4-port-sequential-switch-/)

Title: Re: waterproof electronics
Post by: ronnie42 on January 29, 2024, 03:22:19 pm

Now the Germans know how to give instructions for LED lighting. So easy to follow and all the resistor sizes 😀