Model Boat Mayhem

Technical, Techniques, Hints, and Tips => Radio Equipment => Topic started by: terry1956 on March 07, 2024, 04:41:02 pm

Title: Hobbywing 1060 receiver
Post by: terry1956 on March 07, 2024, 04:41:02 pm

Hi, I have a problem with the hobbywing 1060 I purchased. No matter which position I set the tag it will only run in one direction. Why is this, and is there a way to get reverse.

Title: Re: Hobbywing 1060 receiver
Post by: Klunk on March 08, 2024, 06:53:02 am

Is the throttle in the center on your transmitter?

Title: Re: Hobbywing 1060 receiver
Post by: terry1956 on March 08, 2024, 08:19:32 am

Yes its all starts from the centre position

Title: Re: Hobbywing 1060 receiver
Post by: Klunk on March 08, 2024, 08:52:43 am

Is the jumper  set to F/b/r not F/B

Title: Re: Hobbywing 1060 receiver
Post by: HMS Invisible on March 08, 2024, 10:05:46 am

WP-1060-BRUSHED at F/R MODE requires the MODE jumper completely out.

Title: Re: Hobbywing 1060 receiver
Post by: Fred Ellis on March 08, 2024, 10:07:18 am

Hi
The layout on my 1060 is;

When looking at the ESC have the R/X lead to the bottom, you will have the settings just above the R/X lead, to the left you have the setting pins, the top three should have no jumper, the bottom three pins should be left pin free middle and right pin should be covered by the jumper.


Hope that this is of some help
Fred