Model Boat Mayhem

Mess Deck: General Section => Beginners start here...! => Topic started by: terry1956 on April 20, 2024, 01:01:07 pm

Title: Running two speed controllers
Post by: terry1956 on April 20, 2024, 01:01:07 pm

Hi, I know that if you are running two speed controllers that one of the wires going to the receiver needs to be cut. Can anyone please let me know which one. Thanks

Title: Re: Running two speed controllers
Post by: SailorGreg on April 20, 2024, 01:51:22 pm

The middle one.  Usually red.  And you don't need to cut it, if you use a small pointed implement you can push the contact out of the plug and tape it back out of the way.  That way you can re-insert it if you need to use the ESC elsewhere.

Greg

Title: Re: Running two speed controllers
Post by: terry1956 on April 20, 2024, 03:26:13 pm

Thanks