Model Boat Mayhem - Forum

Technical, Techniques, Hints, and Tips => DC Motors (Brushed) and Speed Controllers => Topic started by: Martin [Admin] on July 16, 2008, 10:38:57 AM

Title: Instructions for a Robbe ESC - Rokraft 100 8211 ?
Post by: Martin [Admin] on July 16, 2008, 10:38:57 AM
Via email to Mayhem....

where can i find detailed instructions to set up robbe esc

its a 15 -- 30 amp rokraft 100    8211 made in germany
 
other marks  are 5 . . . 10NC
 
 
john
Title: Re: Instructions for a Robbe ESC - Rokraft 100 8211 ?
Post by: DickyD on July 16, 2008, 11:38:27 AM
Are you sure you have the right numbers Martin ?  :-\
Title: Re: Instructions for a Robbe ESC - Rokraft 100 8211 ?
Post by: Martin [Admin] on July 16, 2008, 12:07:18 PM
...no.  That's what I was given.
Title: Re: Instructions for a Robbe ESC - Rokraft 100 8211 ?
Post by: DickyD on July 16, 2008, 01:49:51 PM
There is some mention of Rokraft 100 speed control on the internet but nothing on the Robbe site at all.  :embarrassed:
Title: Re: Instructions for a Robbe ESC - Rokraft 100 8211 ?
Post by: malcolmfrary on July 16, 2008, 10:34:58 PM
If it looks like this one
http://www.mscomposit.com/motors/electric_92/speed-controllers/rokraft-100p-tam-controller.html#description
then given that there don't appear to be any buttons on it, it will be plug and go.
Title: Re: Instructions for a Robbe ESC - Rokraft 100 8211 ?
Post by: Mankster on July 17, 2008, 12:13:39 AM
Here's instructions for the Rokraft 120, I believe it should be the same as for the 100.

http://i136.photobucket.com/albums/q191/Wheelerdealers/IMG_4800.jpg