Model Boat Mayhem
The Shipyard ( Dry Dock ): Builds & Questions => Working Vessels => Topic started by: john54 on August 21, 2008, 09:02:39 am
-
Hi All
Does anyone know the best & cheapest :) way to buy or make deck clutter ie gas tanks/cylinders, ect ?
I think she look a bit bare at the moment :( (see pics)
-
Depends on the scale, but a lot of the traders on here do ready-made "deck clutter" - boxes, barrels, ropes, etc.
Rick
-
What scale is the boat John ?
-
Hi
1:24 i think shes 34in the real one is (was) 60ft ish
-
Macs Mouldings do lots of suitable stuff in 1:24 if you don't want to make.
Barrie
-
As Barrie says, Macs Mouldings have allsorts at 1:24
http://www.macsmouldings.co.uk/
-
Thanks Guys
Great help clutter now ordered O0
-
I recently made some coils of rope that turned out quite well. Here's how. I took braided nylon string (kite string, household twine, etc.) and coiled it to the desired shape. I then placed the coil on a flat surface and pushed straight pins horizontally through the windings to hold the shape. Next, I diluted some white glue (Elmer's, here in the USA) with a little water and brushed the solution onto the coiled "rope." When that dried, I painted the rope, removed the pins, and attached the coil to the deck. Easy, inexpensive, and effective.
-
Sounds good anyone else with good ideas like that?
Also a bit of rust here & there would be good :)
-
I recently made some coils of rope that turned out quite well. Here's how. I took braided nylon string (kite string, household twine, etc.) and coiled it to the desired shape. I then placed the coil on a flat surface and pushed straight pins horizontally through the windings to hold the shape. Next, I diluted some white glue (Elmer's, here in the USA) with a little water and brushed the solution onto the coiled "rope." When that dried, I painted the rope, removed the pins, and attached the coil to the deck. Easy, inexpensive, and effective.
Only one problem Capt, how many tugs do you know that have neat coils of rope on the deck ? Dont think even the navy does that.
I started mine off with rope as in photo. Havent got a photo of the other stuff.
You could do with some crew, they will fill a few empty spaces. O0
-
DickyD: my rope coils more-or-less resemble the one at the stern of your tug (the rope being examined by the figure in the red shirt). Using the method I described, it's easy to make almost any shape you like. Hint: in addition to the pins, a small piece of masking tape or two helps hold the string in position as the glue solution dries.
-
Sorry capt, thought you meant those neat little coils.
I made mine by staining the rope with coffee, when dry lay where needed and add a spot or two off supa glue where it touches the deck.
Doing it this way the rope doesnt have to be painted and looks more natural. O0
-
I dipped my new fenders in black strong tea for ageing worked o.k
-
These pictures were taken June this year on a Thames Lighterage Tug, there were not many coiled ropes on the deck.
Brian
-
I think shes looking better with drums & rust O0