Model Boat Mayhem
Technical, Techniques, Hints, and Tips => Detail Work, Rigging, Fittings, Figures Etc. => Topic started by: awvs on May 29, 2009, 04:22:59 am
-
Hello,
I think I made a big mistake by mounting the propshafts provided by model slipway into my Tsekoa II. The shafts are set in plastic bearings which have a lot of play and are pretty noisy (rattle). Does anybody have a relative simple solution for this problem. I did fill the tubes with thin grease as well as minimizing the play with very little improvement .
Thanks
Wilhelm