Model Boat Mayhem - Forum

Mess Deck: General Section => Chit-Chat => Topic started by: Aydemir on January 13, 2010, 10:41:33 PM

Title: Micro Mahogany Classic Boat
Post by: Aydemir on January 13, 2010, 10:41:33 PM
Hello pals, I have some pictures I just start to build. Micro mahogany classic speed boat. Hull prototype made by foam then framed.
After I start to plank with mahogany veneer strips. I use mini car seats for driver seats. After planking I was dig to foam and empty
inside hull for micro rc car receiver, motors and batteries. I already set shaft, prop and rudder. I will try to set motor receiver and micro
direction unit  inside hull. I have to set 2.4 volt mini nimh batteries inside the hull also. This boat  size L 14.5 cm ,W 5.0 cm and H 4.0 cm
Regards for everybody. Aydemir
Title: Micro Mahogany more pictures
Post by: Aydemir on January 13, 2010, 10:45:20 PM
Micro Mahogany more pictures.
Title: Micro Mahogany More Pictures 03
Post by: Aydemir on January 13, 2010, 10:47:39 PM
Pictures 03
Title: Micro Mahogany more pictures 04
Post by: Aydemir on January 13, 2010, 10:49:14 PM
pictures 04
Title: Re: Micro Mahogany more pictures 04
Post by: gondolier88 on January 13, 2010, 10:50:43 PM
Hi- lovely clever little model you've made there- I hope you varnish them too...?

Try replying to your own thread- not creating others.

Greg
Title: Re: Micro Mahogany more pictures 04
Post by: omra85 on January 13, 2010, 10:57:43 PM
That bear could do with some training in self defence  {-) {-) {-) %%

Cheers
Danny
Title: Re: Micro Mahogany more pictures 04
Post by: Aydemir on January 13, 2010, 11:15:55 PM
Greg sorry I am new in this forum and trying to get familiar. Just started If you are interested I have another boats finished.
Just type Zodiac Cabin inflatable then see my other boats there. Thanks again.
Title: Re: Micro Mahogany more pictures 04
Post by: Aydemir on January 13, 2010, 11:19:00 PM
Hey Danny thanks for pictures lovely. I love Bears .Regards.
Title: Re: Micro Mahogany Classic Boat
Post by: tigertiger on January 14, 2010, 04:05:15 AM
***Topics Merged***
Title: Re: Micro Mahogany Classic Boat
Post by: Aydemir on January 15, 2010, 01:47:00 AM
Hello, there are some more pictures... :-))
Title: Re: Micro Mahogany Classic Boat
Post by: Aydemir on January 15, 2010, 01:50:10 AM
More pictures...  :-))
Title: Re: Micro Mahogany Classic Boat
Post by: Aydemir on January 17, 2010, 06:40:22 PM
Hey everyone there are some more pictures. I just start to install RC  Inside the boat, there is motor, PCB and tiny servo.
Title: Re: Micro Mahogany Classic Boat
Post by: Aydemir on January 17, 2010, 06:42:12 PM
More pictures....
Title: Re: Micro Mahogany Classic Boat
Post by: Aydemir on January 17, 2010, 06:45:09 PM
Two more pictures....
Title: Re: Micro Mahogany Classic Boat
Post by: Aydemir on January 17, 2010, 07:03:11 PM
Hello again pals, anyone can tell me how can I include that blue NEW sign when I send some new pictures or toppic to the forum.
Thanks and regards...
Title: Re: Micro Mahogany Classic Boat
Post by: andyn on January 17, 2010, 07:13:33 PM
Hello again pals, anyone can tell me how can I include that blue NEW sign when I send some new pictures or toppic to the forum.
Thanks and regards...

It just happens...
Title: Re: Micro Mahogany Classic Boat
Post by: Aydemir on January 21, 2010, 04:07:32 AM
Motor and drive gear...
Title: Re: Micro Mahogany Classic Boat
Post by: Aydemir on January 21, 2010, 04:08:57 AM
more pic
Title: Re: Micro Mahogany Classic Boat
Post by: omra85 on January 21, 2010, 03:47:38 PM
Here - you're not a gynocologist are you  %) %)
Danny  %%
Title: Re: Micro Mahogany Classic Boat
Post by: Aydemir on January 21, 2010, 08:25:02 PM
Hello Danny Unfortunately I am not. But I am a good Carpenter also I worked Jewellery company back then. I am just challenging by myself.
I like to make something different  also I love model boats. Thanks and regards....Aydemir :}
Title: Re: Micro Mahogany Classic Boat
Post by: Aydemir on February 01, 2010, 03:25:51 AM
Hello everyone, I just installed radio receiver and still working on this little boat. Regards for all. Aydemir %)
Title: Re: Micro Mahogany Classic Boat
Post by: Aydemir on February 01, 2010, 03:27:26 AM
two more pictures.
Title: Re: Micro Mahogany Classic Boat
Post by: Aydemir on February 04, 2010, 05:35:32 AM
Hello again... there are some more pictures I just start to planking  to deck, receiver and rudder system setup finished. Little more work
for finishing. Regards for all. Aydemir
Title: Re: Micro Mahogany Classic Boat
Post by: Aydemir on February 04, 2010, 05:37:41 AM
Two more pic. %) :}
Title: Re: Micro Mahogany Classic Boat
Post by: andyn on February 04, 2010, 03:43:40 PM
Very nice :-))
Title: Re: Micro Mahogany Classic Boat
Post by: Aydemir on February 05, 2010, 03:13:09 AM
Hey pals my little boat almost done. Today I finished planking. I have to varnish this little
Baby now and will be ready for journey... %) {-) Regards for all. Aydemir
Title: Re: Micro Mahogany Classic Boat
Post by: Dreadstar on February 05, 2010, 05:09:46 AM
Very nice job there pal. :-)) O0 O0
Title: Re: Micro Mahogany Classic Boat
Post by: Aydemir on February 05, 2010, 05:33:48 PM
My little Boat have a big sister 30 inches, little one 5 3/4 inches. Some pictures to compare.
Regards for all. :o :} {-)
Title: Re: Micro Mahogany Classic Boat
Post by: Tug-Kenny on February 05, 2010, 05:35:05 PM

Amazing      :-))

ken


Title: Re: Micro Mahogany Classic Boat
Post by: Aydemir on February 11, 2010, 10:36:49 PM
Not finish yet but getting better..  %) :} {-)
Title: Re: Micro Mahogany Classic Boat
Post by: Aydemir on February 17, 2010, 02:40:59 AM
Hello guy's I start to make brass fittings. Until now I made 2 PCs Horn, 4 PCs Cleat and flag base finished. Also windsheld frame by brass wire
I used to made. Thanks to my little rotary Black & Decker RTX tool. Very handy for this job. Regards for all Aydemir  %) O0 {-)
Title: Re: Micro Mahogany Classic Boat
Post by: Aydemir on February 27, 2010, 04:28:27 AM
Hello guy's I was working my little boat deck fitting this days and finaly finished.
There are some pictures hope you will like them. Regards for all. Aydemir %) O0 {-)
Title: Re: Micro Mahogany Classic Boat
Post by: Aydemir on February 27, 2010, 04:30:44 AM
More pictures. ;D :}
Title: Re: Micro Mahogany Classic Boat
Post by: Martin [Admin] on February 27, 2010, 09:17:49 AM
Quite wonderful!  O0
Title: Re: Micro Mahogany Classic Boat
Post by: knoby on February 27, 2010, 11:08:12 AM
absolutely brilliant !!! :-))
Title: Re: Micro Mahogany Classic Boat
Post by: Dreadstar on February 27, 2010, 12:02:15 PM
Superb Job Aydemir  :-)) O0 O0 %%
Title: Re: Micro Mahogany Classic Boat
Post by: Aydemir on February 27, 2010, 03:17:46 PM
Thanks for everyone for comments and lots of regards for all.   Next step will be light for the boat I have some
micro LED from old cellular phone I will try to soldering them and install. Thanks Again Aydemir
Title: Re: Micro Mahogany Classic Boat
Post by: boatmadman on February 27, 2010, 04:36:53 PM
Great little boat.

For lights, had you considered fibre optic? I have used them in the bridge of my current project, here:

http://www.modelboatmayhem.co.uk/forum/index.php?topic=17422.50

Ian
Title: Re: Micro Mahogany Classic Boat
Post by: Aydemir on April 04, 2010, 06:52:18 PM
Hello everyone... Yesterday I was in the Central Park and my little boat start to learn
how to float  under my Zodiac supervision.....Regard for all....Aydemir
Title: Re: Micro Mahogany Classic Boat
Post by: Aydemir on April 04, 2010, 07:00:46 PM
spring start
Title: Re: Micro Mahogany Classic Boat
Post by: gondolier88 on April 04, 2010, 11:14:54 PM
Beautiful in every way mate- well done.

What are you going to do next a live steam Titanic that fits in a jam jar?

Greg
Title: Re: Micro Mahogany Classic Boat
Post by: Minime on April 05, 2010, 12:07:08 AM
did you take those seats out of a toycar? Anyway about the model, that's just amazing. I wish I was able to make a hull like that myself.
Title: Re: Micro Mahogany Classic Boat
Post by: Aydemir on May 31, 2010, 06:21:08 AM
Hello everyone, finally I made a video for my little boat there is a link  for this video.
http://www.youtube.com/watch?v=3ybdV89Kzgs
Title: Re: Micro Mahogany Classic Boat
Post by: Aydemir on May 31, 2010, 06:24:08 AM
Another video for rudder & prop. :-)) :} {-)
http://www.youtube.com/watch?v=SmJlv122fak&feature=channel
Title: Re: Micro Mahogany Classic Boat
Post by: Dreadstar on May 31, 2010, 10:48:04 AM
It's turned out really well Aydemir,and she sails well too.Well done sir. :-)) :} O0
Title: Re: Micro Mahogany Classic Boat
Post by: Aydemir on May 31, 2010, 04:48:59 PM
Thank you for you Dreadstar  O0 There are some pictures also from yesterday.Regards
Gondolier also thanks to you for your comments, Minime sorry for late answer seats are taking from a diecast mini sports car. I dont want
to make them again and easy way to go.Regards again.
Title: Re: Micro Mahogany Classic Boat
Post by: Aydemir on May 31, 2010, 04:54:49 PM
more pics :} {-)
Title: Re: Micro Mahogany Classic Boat (Videos Added)
Post by: Aydemir on June 01, 2010, 10:12:23 PM
Hello pals, I have some pictures I just start to build. Micro mahogany classic speed boat. Hull prototype made by foam then framed.
After I start to plank with mahogany veneer strips. I use mini car seats for driver seats. After planking I was dig to foam and empty
inside hull for micro rc car receiver, motors and batteries. I already set shaft, prop and rudder. I will try to set motor receiver and micro
direction unit  inside hull. I have to set 2.4 volt mini nimh batteries inside the hull also. This boat  size L 14.5 cm ,W 5.0 cm and H 4.0 cm
Regards for everybody. Aydemir